PDA

View Full Version : help for v525



nikmar56
26-06-2004, 11:27 AM
My motorola v525 after a few drops of water that felt on it,
starts only with the ac adaptor connected, or the usb cable, with the following screen. "Boot Loader 07.60 SW Version:
TRIPLETS_G_0B.09.1DR_VA1"
OK to Program USB Transfer Mode"
Can you tell me what it means or what to do?

Salami1_1
26-06-2004, 02:09 PM
short circuit, that's what happend.


To try to fix you phone you need to disamble it put pcb in Sonic cleaner with alcohol and use the Sonic cleaner..

If yout lucky it will be ok, else you are going to have to replace parts.

WBR

nikmar56
28-06-2004, 07:04 PM
It didn' t work but thanks a lot anyway. Can you tell me where i can find
a new pcb and other spare parts? I tried from google but didn' t found
something that could help me.

Salami1_1
04-07-2004, 06:04 PM
After using the sonic cleaner, you also should flash your phone.

Software in phone is probably little fucked up too.

You can flash with cracked Victor software. (watch out for the version which fucks your hdd)

WBR

nikmar56
11-07-2004, 07:33 PM
After using the sonic cleaner, you also should flash your phone.

Software in phone is probably little fucked up too.

You can flash with cracked Victor software. (watch out for the version which fucks your hdd)

WBR
I tried with version 3.2.3 beta full, but it tells me no usb found.
Trying with the add new hardware wizard with the phone connected, it finds a "s flash neptune lte" and asks me for the drivers. I didn't find anything in the v525 cd, neither looking
with the known search machines in the net. Is there any usb drive that matches?

bobski
12-01-2007, 01:38 PM
Use P2K_Easy_Tool_v41

no test point required for this model (unless new bootloader)

software comes with drivers.