PDA

View Full Version : Startup Logo



Evil Neo
23-09-2002, 08:32 PM
plz does any one have anmited start logo or any one can tell me how i can made it ?
i don't use ppmedit

help plz

i work on 3310 ver 5.55

welshwizard
23-09-2002, 10:56 PM
check my site ;)

Harry Zhily
24-09-2002, 01:07 PM
Hey...


this is my thread , hope this will help (worked on my 3310 V 5.57)


- used flashgraphic V1.0
- open the old flash of 3310 U can used V. 4.45
- save the All animited start logo ( you can chose: Standart,
Iteneris) and edited as you like.
- again open flashgraphic V1.0
- Upload your edited animited start logo, then Upload and
save it.
- Open the edited flash in nokiaHex Pr6, then find the start and
End offset of animited start logo.
- Open nokiaHex V1.04 (don't closed the NokHex Pr6)
- open your flash file 3310 V 5.57 / V 5.55
- then find the start and End offset of animited start logo.
- copy the hexcode from NokHex Pr6 to NokHex V1.04
- copy all the Hexcode of animited start logo.
- save it then calculate the Mcu checksum
- check the animited start logo priview with flashgraphic V 2.0 or
PPMedit
- if All OK uses PPm manager to calculated CRC
- flash it Bck to U'r Phone


If still confused send me an Email, I will help U with the detail.

[email protected]

Good Luck...!!!!

:) :) :)
---------------------------------------------------------------------------------
We are here to help Each other.....

Evil Neo
24-09-2002, 02:49 PM
@welshwizard

i did not find any thing in the site

@Harry Zhily

thx alot i will try it and tell , i allready tryed flashgraphic b4 and i get the normal start one that may cuz i did not try to edit with nokhex thx any way

welshwizard
01-10-2002, 11:49 PM
click 'tutorials'

tells you how 2 edit your startup logo.... ;)

try http://welshwizard.isgreat.tv