Transfer User Data

[Mulder3]

Anyone knows how can i transfer my own phone user data to my new phone using Transfer User Data option in *#war0anty# menu ? maybe with WinTesla???

[doliman]

I did "transfer user data" having two nokias connected at the same time to gnd and mbus. "Master" nokia was 3330 and slave was 3210.

I have a hell'of'a problems now. 3330 simply screamed Invalid phone types while my (poor) 3210 contact service. Now I'm screaming how can that be and trying to solve the problem.

Anyone knows anything about this? Help? Please?

[martinzaloudek]

Can be this transfer used for backup info to PC?
Exist any software for it?

[User32]

Of course you get such errors and problems! The 3330 has 4MBytes of memory while the 3210 has 2MBytes.

[doliman]

Originally posted by User32
Of course you get such errors and problems! The 3330 has 4MBytes of memory while the 3210 has 2MBytes.

Um.. Ok.. Now, how am I going to be able to solve this? I get CS even after flashing with full 3210 flash,.??
:confused:

[User32]

1) Download a mcu+ppm flash for 3210 (must be <2MBytes), if you don't have one, and upload it to your phone.
2) Connect it with a f/mbus cable and turn it on without any sim card.
3) Using knok-phoenix-1 (I prefer it most):
i. update FAID
ii. reset to full factory settings
iii. reset sp locks

I think everything will be ok.

[doliman]

Um.. I did as you said, I made CPU and PPM flash backup b4 i did anything else.. I flashed full flash (2MB, from 0x20000 to 0x400000 (+- one zero)), worked oky, but it went wrong onwards.

In kNok i tried using: Set FAID and Quick set FAID both screamed:

MBUS_SecurityCommand : cannot execute 'Get MSID'

I tried continuing with all other steps you described but still no luck, still CS. Then I went to see what's going on in WINTESLA and got the following data from Variant reader:


MCU SW Version....................: V 06.00 03-10-00 NSE-8 (c) NMP.
PPM SW Version....................: V 06.00 03-10-00 NSE-8 (c) NMP.
PPM Package Version...............: B
IMEI..............................: <hidden>
HW Version........................: 0587
Production Serial Number..........: SO1676846
Product Code......................: 0504600
IMSI..............................: 400000000000000
SIM Lock State (bin)..............: 00010000
GID1 (hex)........................: 0000
GID2 (hex)........................: 1000
Autolock (bin)....................: 00000000
Operator Configurable Data (bin)..: 00000000
Access Class (hex)................: 00
Voice MBX.........................: - Invalid use
Welcome Note......................:
Language..........................: - Wrong response
Ringing Tone......................: - Wrong response
Ringing Volume....................: - Wrong response
Dealer Welcome Note...............:
Product Profile...................: 30008090


All wintesla tests are ok even PPM, except for: rtc batery and waranty state.
Warranty state says:
STATE: DEFECTIVE

Phone info says:


MCU SW.....................: V 06.00 03-10-00 NSE-8 (c) NMP.
MCU SW Checksum............: 6524
PPM Version................: V 06.00 03-10-00 NSE-8 (c) NMP.
PPM Package Version........: B
DSP Internal SW............: 4
DSP External SW............: B50.4.110 18-Aug-00 Undef (c) NMP.
System ASIC................: G-01
COBBA......................: 631
Serial Number..............: <hidden>
HW.........................: 0587
Original Serial Number.....: - Warranty locked
Production Serial Number...: SO1676846
Manufac tured (MM YY).......: - Warranty locked
Purchase (MM YY)...........: - Warranty locked
Order Number...............: ???????
Product Code...............: 0504600
PCI Version in Phone.......: ????
Basic Production Code......: 0503702


I admit i was playing with some other software for unlocking the phone and "unlocked" it. It was USER mode unlocked.

What now? Help? Please?:(

[Matique]

I thought u need a flash cable to flash a chip

[lonegunman]

You need to put new eeprom into phone that should fix it, but on the 3210 eeprom is stored on chip not on flash so a little bit harder to fix.

[luther]

err @ user32
Mb is not Mbytes!