Liam
30-09-2002, 12:44 AM
CONFIDENTIAL
Nokia Mobile Phones Engineering Bulletin No. EB-480 / 23.09.02
UK Technical Support Level 1
Effected Product: NHM-4 (8910)
NEW DATA PACKAGE V4.0 (MCU SW 3.57) Download: V3.57
New Product Data Package version 4.0 has been released for NHM-4.
Before installing Product Data Package, please install Phoenix Service Software version 3.76.002 and Flash Update Package 2.06.001.
Product Data Package v 4.0 includes following SW components:
- MCU SW version 3.57
- Language package files (PPM's) for MCU SW version 3.57
- Product specific INI-files
- Default SW setting files (Product profiles, user profiles, WAP bookmarks etc.)
- PCX-files for Label printing
- User interface configuration file for Product Profile tool
- Product specific files for Faultlog reporting
Changes made from MCU version 3.06 to version 3.57:
GPRS:
- Timer T3186 is reset when camping to the new cell starts.
- Improvements to SI13 refresh on ext-BCCH.
- Improvement to camping on PCCCH: now possible to camp on cell after PSI1 and PSI2 are received. Earlier PSI1, PSI2 and PSI3 were all needed.
- RAC_ valid invalidated after every detach (local or procedure).
- Improvement to MS functionality: in NW, which continuously rejects the TBF establishment by sending immediate assignment reject.
- Improvement to cell reselection in case where C2 parameters are used for cell priorisation.
- When MS lost coverage and returns service in a new RA and network mode of operation is I, then RAU is performed with update type combined RA/LA updating. If RA is not changed then update type is combined RA/LA updating with IMSI.
- Total PLMN search timer value is optimised for every used band combination.
- Pending or suspended PLMN search is started if own SI search is ongoing during TBF release.
- Improvement to SI search in case where SI13 is received with changed BCCH_CHANGE_MARK.
- Improvement to cell reselection in case where reselection reason is abnormal cell reselection.
- Attempt counter for unresponded attach request, detach request and routing area update request was increased after every request. Now attempt counter is increased after 5 requests.
- Improvements to RAU procedure in case where NMO changes from NMO2 to NMO1.
- Improvement in own SI search clearing when target cell reading is started in TBF mode.
- Improvement in reception of too many erroneous PSI blocks.
- Optimisation to 900->1800 cell reselection time.
- Direct hopping improvement: The length of the reassembled block is correctly updated to the actual output block length field, which is used in decoding of the message.
- Improvement in PFI value handling in Packet Resource Request.
- Pending channel configuration optimised neighbour SYNC or PSW measurement during TBF causing long cell reselection time.
- Improvements in Early Classmark sending in PCCCH.
- Improvements in handling the rejection cause #15 "No suitable cells in LA".
- Improvements in timing offset threshold for early SCH measurement in a PDTCH configuration. Now neighbour synchronization is not missed in certain situations.
- If network transmits a message with incorrect values in non-GPRS cell options IE, then non-GPRS cell options IE is marked as not being present in the message. Implementation changed to cope with incorrect message.
- Not able to handle Immediate Assignment if it came in two parts (two-message assignment). Now two message assignments handled correctly.
- Improvements in handling of the MPH_NEXT_CELL_REQ message in PCCCH cell.
- Cell reselection not allowed to perform a barred cell during ongoing DL TBF.
- Handling of the combined RAU accept during MM state "Receive RR Activation Response" improved.
- Neighbour measurements are resumed after non-DRX->DRX (PCCCH).
- When SMS character coded NITZ or flexible PLMN name had 7 spare bits in the last octet, then the name length was calculated 1 character too long. Therefore in display an extra '@' character was shown when name length was 7, 15, 23, 31 or any other (8 * n - 1) length.
- TA update procedure changed. Latest sent TAI info is reused now as long as it is valid even if we get new values for the other direction. This change avoids gaps in the earlier procedure in receiving continuous TA blocks when taking the new TAI values in use.
- When PCCCH is accessed RSSI values are changed so that reselection is triggered. After successful reselection to another cell auto PSI1 -procedure is completed correctly.
- With several band combinations maximum PLMN search time is correctly set when e.g. next cell request received during suspended PLMN search.
- The cell, where SI/PSI13 is received, is supposed to support GPRS. Earlier GPRS support was marked as true only if PBCCH description is present in the SI13.
Messaging:
- Improvements for SMS stability.
- Compact business cards are received as normal SMS.
- China input improvement: In SMS '?' is shown instead of an empty 'box'
Other changes:
- Alarm Clock Indicator at start up improvement. Indicator was sometimes displayed briefly at start up even Alarm Clock was not activated.
- SIM lock improvement
- Operator list updated:
New Operators:
"T-Mobile UK"
(234/31)
"T-Mobile UK"
(234/32)
"RUS: INDIGO"
(250/19)
"IN-DOLPHIN"
(404/68)
"IN-DOLPHIN"
(404/98)
"SyriaTel"
(417/01)
"YEM-SABA"
(421/01)
"UZMACOM"
(434/00)
"UZMACOM"
(434/02)
"UZB-UZD"
(434/07)
"TANGO LAO"
(457/08)
"STP CSTmovel"
(626/01)
"TELE2"
(250/20)
"TJK MLT"
(436/03)
"H3GA"
(505/06)
"I.C.E"
(712/01)
"SETAR GSM"
(363/01)
"UNITEL"
(631/02)
Removed operator:
"I.C.E"
(188/01)
Name changed:
"GR VODAFONE"
"vodafone GR" (202/05)
"NL Vodafone"
"vodafone NL" (204/04)
"P VODAFONE"
"vodafone P" (268/01)
"VODAFONE MLA"
"vodafone MT" (278/01)
"ESSARH"
"ESSAR"(404/01)
"INA AirTel"
"AirTel" (404/02)
"INA AirTel"
"AirTel" (404/03)
"ESSARU"
"ESSAR" (404/15)
"AT&T"
"IDEA" (404/22)
"AT&T"
"IDEA" (404/24)
"ESSARR"
"ESSAR" (404/60)
"RPG MP"
"IDEA" (404/78)
"INA AirTel"
"AirTel" (404/90)
"INA AirTel"
"AirTel" (404/92)
"INA AirTel"
"AirTel" (404/93)
"INA AirTel"
"AirTel" (404/94)
"INA AirTel"
"AirTel" (404/95)
"INA AirTel"
"AirTel" (404/96)
"INA AirTel"
"AirTel" (404/97)
"INA AirTel"
"AirTel" (404/98)
"GP"
"BGD GP" (470/01)
"CLICK"
"Egy Vodafone" (602/02)
"OMNITEL"
"vodafone IT" (222/10)
"VODAFONE"
"vodafone AL" (276/02)
"ST GSM"
"SingTel G9" (525/01)
"SingTel"
"SingTel G18" (525/02)
"Mobilis"
"Orange CAM" (624/02)
"ZM ZAMCELL"
"ZM CELTEL" (645/01)
"O2 DE"
"o2 de" (262/07)
"SPACETEL"
"94 SYRIA" (417/02)
"HELLO"
"TH GSM 1800" (520/23)
New country name:
"STP" (626)
"TJK" (436)
"ABW (363)
"AGO (631)"
Country number changed:
"CRI"188
712
Needed equipment for software update:
- Phoenix Service Software version 03.76.002
- NHM-4 Data Package version 4.0 (MCU SW 3.57)
- Flash Update package (for FPS-8*/FLS-4*) version 2.06.001
- PKD-1 Dongle & Activated Flash Prommer FPS-8 or
FLS-4* POS Flash Dongle
- NHM-4 Specific service tools
Nokia Mobile Phones Engineering Bulletin No. EB-480 / 23.09.02
UK Technical Support Level 1
Effected Product: NHM-4 (8910)
NEW DATA PACKAGE V4.0 (MCU SW 3.57) Download: V3.57
New Product Data Package version 4.0 has been released for NHM-4.
Before installing Product Data Package, please install Phoenix Service Software version 3.76.002 and Flash Update Package 2.06.001.
Product Data Package v 4.0 includes following SW components:
- MCU SW version 3.57
- Language package files (PPM's) for MCU SW version 3.57
- Product specific INI-files
- Default SW setting files (Product profiles, user profiles, WAP bookmarks etc.)
- PCX-files for Label printing
- User interface configuration file for Product Profile tool
- Product specific files for Faultlog reporting
Changes made from MCU version 3.06 to version 3.57:
GPRS:
- Timer T3186 is reset when camping to the new cell starts.
- Improvements to SI13 refresh on ext-BCCH.
- Improvement to camping on PCCCH: now possible to camp on cell after PSI1 and PSI2 are received. Earlier PSI1, PSI2 and PSI3 were all needed.
- RAC_ valid invalidated after every detach (local or procedure).
- Improvement to MS functionality: in NW, which continuously rejects the TBF establishment by sending immediate assignment reject.
- Improvement to cell reselection in case where C2 parameters are used for cell priorisation.
- When MS lost coverage and returns service in a new RA and network mode of operation is I, then RAU is performed with update type combined RA/LA updating. If RA is not changed then update type is combined RA/LA updating with IMSI.
- Total PLMN search timer value is optimised for every used band combination.
- Pending or suspended PLMN search is started if own SI search is ongoing during TBF release.
- Improvement to SI search in case where SI13 is received with changed BCCH_CHANGE_MARK.
- Improvement to cell reselection in case where reselection reason is abnormal cell reselection.
- Attempt counter for unresponded attach request, detach request and routing area update request was increased after every request. Now attempt counter is increased after 5 requests.
- Improvements to RAU procedure in case where NMO changes from NMO2 to NMO1.
- Improvement in own SI search clearing when target cell reading is started in TBF mode.
- Improvement in reception of too many erroneous PSI blocks.
- Optimisation to 900->1800 cell reselection time.
- Direct hopping improvement: The length of the reassembled block is correctly updated to the actual output block length field, which is used in decoding of the message.
- Improvement in PFI value handling in Packet Resource Request.
- Pending channel configuration optimised neighbour SYNC or PSW measurement during TBF causing long cell reselection time.
- Improvements in Early Classmark sending in PCCCH.
- Improvements in handling the rejection cause #15 "No suitable cells in LA".
- Improvements in timing offset threshold for early SCH measurement in a PDTCH configuration. Now neighbour synchronization is not missed in certain situations.
- If network transmits a message with incorrect values in non-GPRS cell options IE, then non-GPRS cell options IE is marked as not being present in the message. Implementation changed to cope with incorrect message.
- Not able to handle Immediate Assignment if it came in two parts (two-message assignment). Now two message assignments handled correctly.
- Improvements in handling of the MPH_NEXT_CELL_REQ message in PCCCH cell.
- Cell reselection not allowed to perform a barred cell during ongoing DL TBF.
- Handling of the combined RAU accept during MM state "Receive RR Activation Response" improved.
- Neighbour measurements are resumed after non-DRX->DRX (PCCCH).
- When SMS character coded NITZ or flexible PLMN name had 7 spare bits in the last octet, then the name length was calculated 1 character too long. Therefore in display an extra '@' character was shown when name length was 7, 15, 23, 31 or any other (8 * n - 1) length.
- TA update procedure changed. Latest sent TAI info is reused now as long as it is valid even if we get new values for the other direction. This change avoids gaps in the earlier procedure in receiving continuous TA blocks when taking the new TAI values in use.
- When PCCCH is accessed RSSI values are changed so that reselection is triggered. After successful reselection to another cell auto PSI1 -procedure is completed correctly.
- With several band combinations maximum PLMN search time is correctly set when e.g. next cell request received during suspended PLMN search.
- The cell, where SI/PSI13 is received, is supposed to support GPRS. Earlier GPRS support was marked as true only if PBCCH description is present in the SI13.
Messaging:
- Improvements for SMS stability.
- Compact business cards are received as normal SMS.
- China input improvement: In SMS '?' is shown instead of an empty 'box'
Other changes:
- Alarm Clock Indicator at start up improvement. Indicator was sometimes displayed briefly at start up even Alarm Clock was not activated.
- SIM lock improvement
- Operator list updated:
New Operators:
"T-Mobile UK"
(234/31)
"T-Mobile UK"
(234/32)
"RUS: INDIGO"
(250/19)
"IN-DOLPHIN"
(404/68)
"IN-DOLPHIN"
(404/98)
"SyriaTel"
(417/01)
"YEM-SABA"
(421/01)
"UZMACOM"
(434/00)
"UZMACOM"
(434/02)
"UZB-UZD"
(434/07)
"TANGO LAO"
(457/08)
"STP CSTmovel"
(626/01)
"TELE2"
(250/20)
"TJK MLT"
(436/03)
"H3GA"
(505/06)
"I.C.E"
(712/01)
"SETAR GSM"
(363/01)
"UNITEL"
(631/02)
Removed operator:
"I.C.E"
(188/01)
Name changed:
"GR VODAFONE"
"vodafone GR" (202/05)
"NL Vodafone"
"vodafone NL" (204/04)
"P VODAFONE"
"vodafone P" (268/01)
"VODAFONE MLA"
"vodafone MT" (278/01)
"ESSARH"
"ESSAR"(404/01)
"INA AirTel"
"AirTel" (404/02)
"INA AirTel"
"AirTel" (404/03)
"ESSARU"
"ESSAR" (404/15)
"AT&T"
"IDEA" (404/22)
"AT&T"
"IDEA" (404/24)
"ESSARR"
"ESSAR" (404/60)
"RPG MP"
"IDEA" (404/78)
"INA AirTel"
"AirTel" (404/90)
"INA AirTel"
"AirTel" (404/92)
"INA AirTel"
"AirTel" (404/93)
"INA AirTel"
"AirTel" (404/94)
"INA AirTel"
"AirTel" (404/95)
"INA AirTel"
"AirTel" (404/96)
"INA AirTel"
"AirTel" (404/97)
"INA AirTel"
"AirTel" (404/98)
"GP"
"BGD GP" (470/01)
"CLICK"
"Egy Vodafone" (602/02)
"OMNITEL"
"vodafone IT" (222/10)
"VODAFONE"
"vodafone AL" (276/02)
"ST GSM"
"SingTel G9" (525/01)
"SingTel"
"SingTel G18" (525/02)
"Mobilis"
"Orange CAM" (624/02)
"ZM ZAMCELL"
"ZM CELTEL" (645/01)
"O2 DE"
"o2 de" (262/07)
"SPACETEL"
"94 SYRIA" (417/02)
"HELLO"
"TH GSM 1800" (520/23)
New country name:
"STP" (626)
"TJK" (436)
"ABW (363)
"AGO (631)"
Country number changed:
"CRI"188
712
Needed equipment for software update:
- Phoenix Service Software version 03.76.002
- NHM-4 Data Package version 4.0 (MCU SW 3.57)
- Flash Update package (for FPS-8*/FLS-4*) version 2.06.001
- PKD-1 Dongle & Activated Flash Prommer FPS-8 or
FLS-4* POS Flash Dongle
- NHM-4 Specific service tools