can 6250 (C) 's T9 's goto 7110 (D) 's flash file?

[SubZero]

can i get the T9 pack of the 6250 and change it with the 7110 's T9 pack?

i am planning to open the PPM Manager 091 and explode both the 7110 's and the 6250 's flash files.
then i will delete 7110 's 7110_LDB.fls and rename the 6250 's 6250_LDB.fls to 7110 's 7110_LDB.fls
then i will open the 7110.Exploded file with PPM Manager 091 and after updating all ppm 's crc 's i will save the flash file (thus replacing 7110 's T9 dictionaries with the 6250 's)

the question is will/should the flash file work for the 7110?
why/why not?

original 7110 (D) languages:
51 COMM 0x80000000 0x778 (1912)
2 GERM 0xA8000000 0x8398 (33688)
1 ENGL 0xA8000000 0x774C (30540)
3 FREN 0xA8000000 0x7E1C (32284)
4 ITAL 0xA8000000 0x7E6C (32364)
13 TURK 0xA8000000 0x76FE (30462)

original 7110 (D) T9 's:
2 GERM 0x00000000 0x1340F (78863)
1 ENGL 0x00000000 0xCB00 (51968)
3 FREN 0x00000000 0xDF18 (57112)
4 ITAL 0x00000000 0xF284 (62084)

original 6250 (C) T9 's:
2 GERM 0x00000000 0xF6C1 (63169)
1 ENGL 0x00000000 0xB401 (46081)
13 TURK 0x00000000 0x191B1 (102833)


original 6250 (C) languages:
51 COMM 0x80000000 0x7C6 (1990)
2 GERM 0xA8000000 0x8B3E (35646)
1 ENGL 0xA8000000 0x7F18 (32536)
13 TURK 0xA8000000 0x7C74 (31860)
3 FREN 0xA8000000 0x8108 (33032)

[Manipulator]

if 6250 english T9 have same lenght with 7110 than you have a big change to add 6250 T9 to 7110.but anyway you can give it a try,it will not harm your phone.

[Manipulator]

i think you want turk T9.
the english t9 of 7110 is same as 8210 one but it don't have turk T9 too.i think all the phone that have english T9 that same lenght with 7110,8210,don't have turk t9.
you can't try other turk t9,but i don't think it will work by simply add in.

[Serdem]

To Subzero;

You can use 6210 T9 with 7110 (i don't know 6250 T9 works with 7110) but only copying LDB files will not effect on your phone.

You must change some MCU bytes to explain the phone which T9 included in the PPM section.

For example Turkish T9 code is 13, German code is 2 etc. The T9 code table is located on the MCU.

If you want to use any T9 dictionary on your phone then your phone looks on the MCU for T9 code list and if selected dictionary is in list you can use this dictionary.

At that time i don't have enough information which bytes must be changed from MCU because i am not working on my computer. If i go to my place within 2-3 days then i can post some information.

Best Regards.