box problem

[sandra02]

I'm having trouble to make the Dejan Box work (please check the attachment for the schematic)...I've tried reading the flash from my phone (3210v600) using diferent software,i.e. dejan flasher v1.03,v1.04,1.05 even tried others like dejan flasher modified by Lead and DRU CREW, also tried KNOK and ROlis...Please can any one tell me whats wrong. I've already check the PCB layout, changed my LPT port settings but still no luck

When i try to read flash using Dejan Flasher software it recognizes the box. Using Function F1 says:

Connect phone to box. Press Enter (turn on Phone)

...as soon as I press Enter it says:

Bad connection or bad box!

I'm using a pc running WinME (Pentium 4)

One more thing about the box, when i connect it to my phone (which is switched off) it turns my phone ON. Is it normal?


Someone Help! need badly...

[Manipulator]

where are you from.
the schematic for the dejan box don't have any problem,but do you know that the IC chip that use in the dejan box need to program one.
if you sure that your pcb,and schematic have no problem,that the problem is in the hex code.
1. the hex code have problem,
2. the hex code is not really programed inside, or
3. hex code that not success verifyed,not complet programmed.

[KnOeFz]

dejan 1.05 won't start at all if there's no programmed pic inth ebox sI thnk there might be something else... Personally I don't read flash with the box... I use my plain flasher and rolis to do that... I use box only to make flashes and calk faid.

If the box is wrong but start op with dejan 1.05 you can sometimes fox it by hitting F10. I had build 2 times a box that was not functioning properly that would work after hitting F10.

Doe flashing with winDLS or Nworkshop go ok?

-=K=-

[sandra02]

sorry for long post...
i think it is also the hex code.... but do you know how to program it? or maybe i need some new schematic , what do think? is there some other good boxes out there? thanks for taking the time reveiwing the schematics!!!:p :p :p

[Romano1]

If you can't program the IC chip, just make easier flasher. You can find the schematics at: http://www.id2.cz . Look for light Dejan flasher in hardware section. The site is not in English but I think you'll find it. And use Knok or Rolis for flashing. ;)