want to put french language in 3350

[mimi74]

How can I do it, because tried differents solutions, and nothing work at all... I've made several 3310, 5110, 6110 before

Thanks

[mimi74]

how to make a cheksum on this phone ????

[mimi74]

noone to give me a hand ????:confused: :rolleyes:

[Manipulator]

where you get the french languages for 3350,
post it here,i try to join it for you,but i not sure i can do it. OK.
what/how you want me to help.

[mimi74]

I've joined this file here
I've made this file myself, and put it in my flash 5.15, work fine but no network, and no way to find a solution, PPMmanager can't make CRC correction on this phone:rolleyes:
One more problème, I've got english T9 yet...

[Manipulator]

i have modify for you,
french with T9 and english with T9.
explode the 3350 v5.05 with ppmmanager,delete the ?.LDB and ?.TEXT,replace with the file i send to you.

hope it can work.

[mimi74]

Thanks a lot, I try immediately...:)

[mimi74]

Well, the menus are working in english and french, T9 too, it's fine, but my phone till restart and no network yet...:rolleyes:

[mimi74]

Whitch programme to use for check CRC on 3350 file flash ????

Thanks

[kOuBy2k1]

U can use WinDLS 5.0... U can found it here... (http://fr.groups.yahoo.com/group/nokiaflash/)


Good Luck... ;)

[Manipulator]

i use ppmmmanager to calculate checksum.
try to use rolis nokiatools v1.8 to set FAID.

[mimi74]

Ok, I've tried with PPM manager and EPROM tools 3.1, then with Nok 1.8, no network at all:mad: now I will test with WinDLS 5.0 but I'm :confused:

[mimi74]

I've tried WinDLS 5.0, but this prog not working with my cable so...

[pipoy]

ppmmanager & ppmedit1.0a won't support 3350, try the latest version of these proggies. i tried it myself & it wont work!

:cool:

[Manipulator]

lets see,hamm,i think i need to do some trick on the LDB and the text.see wheter this no signal is cause by the french text and LDB or not.
later i post the file for you to test agian,i don't have 3350 can't test it my self.

[mimi74]

Thanks a lot... The project go on...

[mimi74]

I'm working on last firmware 5.22 translation...

[mimi74]

no idea yet :confused:

[mimi74]

:confused:

[mimi74]

join my french 5.22 pack

[Manipulator]

Originally posted by mimi74
join my french 5.22 pack

what you mean,
you want me to join the file for you or you mean your file is working and have signal.

[mimi74]

non signal yet, so if you could do the same as for 5.15 for me, then I will find a way to have a signal

[Manipulator]

last time you post the file is for 3350 v5.15 one ah,
i though it is v5.05 one,so i add it with v5.05 english.
so i think it maybe some problem with english text,but i don't think it have big difference,you can check the lenght of my file see is it same with v5.15 english.
the T9 is all the same one,so no problem.

i attach this file is same like the last time one,but i have do some trick on the french text & T9 ID.so i could be able to get signal.
try it with v5.05 or 5.15.

can you send me a copy of 3350v5.22 pack C,so a can add the new file you post

[mimi74]

here's the PPM 5.22 pack C
Don't know if you wanted MCU too ???

[Manipulator]

yes,post the mcu too.pls.
thanks in advance.

[mimi74]

I don't know if you have seen that but in PPM manager, tell me in "modele" box "Unknown (NHM-9)" so PPMmanger don't support 3350 at all

[mimi74]

here's MCU too, cant upload, too big I think
you can find it here
http://napalm.all.at/

[Manipulator]

Originally posted by mimi74
I don't know if you have seen that but in PPM manager, tell me in "modele" box "Unknown (NHM-9)" so PPMmanger don't support 3350 at all

yes,i notice that too,but i dont think it has any problem with it.
where you attach the mcu.

[mimi74]

see the link below... can't attach the file, I don't know why

[Manipulator]

yes,i getting it now,have you tryed the file i post.

[mimi74]

not yet... but very soon :)

[mimi74]

Just tried it, no network and some problem with the french language, better before...:)

[NokiaPhreak]

I think there is no software can update 3350 flash file(modified) checksum right now, so modify 3350 is not possible for now.

[mimi74]

it's not cool... :rolleyes: waiting with my english language on it, but it's a pitty:mad:

[NokiaPhreak]

every nokia phone should have english language...what language pack you using....

[Manipulator]

some one told me that till now no program can use to calculate the checksum of 3350.
so i need you to help me to help you.
you use the ppmedit to modify the working and got signal 3350 flash file.change some bit of a picture in mcu and add a tone only on ppm,than save it and flash it to your phone,see can get signal or not.

[mimi74]

no signal if I move a bit in PPM

[NokiaPhreak]

as i said, it not work.....:(

[mimi74]

yes not for the moment, but I will find a solution:)

[mimi74]

no solutions yet :(

[mimi74]

help :(

[mimi74]

Manipulator could you send me back 5.22 files (same as first 5.15 you had send to me) want to try something with those files
Thanks

[HANDYCRACKER2k2]

hello! use chkkiller from joox,this will kill all chksums and FAID!!
read out your mcu+ppm(1file)then kill checksums,flash it back,make FAID update once and it must work!(hope also on a 3350!!!:)

[Manipulator]

Originally posted by mimi74
Manipulator could you send me back 5.22 files (same as first 5.15 you had send to me) want to try something with those files
Thanks

give me one day time.

[mimi74]

thanks

[mimi74]

help, I need somebody... Help :(

[mimi74]

I've made it, working fine now...:cool:

[Manipulator]

really,do you mean you can modify the 3350 flash than you can get signal.how you do it .

[mimi74]

Only with
-PPMmanager
-g3n0lite v1.6
-ChkFixer
Then flash with Flasher478b6
The only thing not working on my phone is Snake II and one another game, I dont know why, but original flash is the same
Looking what is going wrong

[mimi74]

now find the problem with my game
One last thing going wrong
When I read "Coût" my phone does not writing û but a y with accent on it

[mimi74]

find this last problem too

bye:D

[Nanda]

Hi mimi74,

now that you have finished the software part there are ORIGINAL Nok 3350 keypads and faceplates available on eBay, I just got them for my 3410. They look extremely cool, I'll try to borrow a Digital camera to post photos here.

That is, if you'd like a complete 3330 to 3350 conversion including appearance, as I do.

Cheers,

[Nanda]

(I hope that didn't sound like an advertisement! I just said it because I only feel I've finished a project when just about everything looks and feels like the original!)

[mimi74]

Something like that

http://membres.lycos.fr/mimi74/3350.JPG

[Phusuke]

i would really appreciate it if u guys can send me a working 3350 flash higher than V05.05

thanks in advance

maybe i could help!

[mimi74]

and the language you want??? on my 5.22 ??? :)

[Phusuke]

i just downloaded all the files u posted here and didnt find any problems modifying it, its kewl i already used it on my fone and was able 2 sell it immediately

thanks 2 u :D