Nokia 3210

[gabiz]

Hello everyone I have a problem with nokia 3210 v6.0, simlock 1 was closed I build a mbus interface and try to unlock it with some programs don't work with others work fine but bhone didn't find any network and after few minutes says insert corect sim card I read it again and the simlock was closed again.I try again but same thing happens.If I try to call 112 dont work but after some long time "tryng emergency call" if I switch off and power on phone found my network (orange)but the same after few minutes loose network .power off power on result in insert corect sim card.So I build a cable to flash it (flasher interface by Dejan)I don;t have 74hc14 so I use 74ls14 (much faster?)All programs don't work only kNok I have made a backup and try to write a new flash,don't work then I erase all flash that works:) But phone is dead now.24c128 is dead also.I take a new24c128 and write it with a new 24c128bin for 3210.nothing happens.Due to limit of 1000 letter finish and continue another post

[jeffkow18]

u need a good mbus cable ,dejan flasher cable and a good backupbs

[mbus]

After flashing with a good backup, try to change your eeprom then use Rolis 1.8 to change your IMEI (original), then update faid.

[gabiz]

I think cable is ok because works with 3310 I try it on my phone and read and write works fine but un 3210 say invalid mcu and after few seconds can not erase what can I do?
My cable is buil with 74ls14 in the next few days when I have a 74ls14 I'll try again with a new cable

[mbus]

Dont use 74ls14, use only 74hc14..

[gabiz]

Thanks for idea but I build two cables and 74ls14 works fine with external power and 74hc14 don't work at all and viceversa 74hc14 works without external power and 74ls14 don't.