Nokia Flash Reverse Electronic Engineering >
Archive >
Nokia FREE Archive >
Other Mobile Phones >
Samsung >
Agere platform: D100,E105,E400,E710,E715,S1XX,S20,S208,S3XX,Q10x,Q20x,P10x,P40x,x105,X40x,X430 > usb flash d500
View Full Version : usb flash d500
wolfecom
19-04-2005, 11:15 AM
anyone know if you can flash a d500 with a usb cable i use the serial cable with 9 volt connector and corona downloader but this takes an hour and a half to flash
need to know if you can use usb cable with corona cause ive been told flash time is down to 20 minutes
fr33s0ft
23-04-2005, 08:14 PM
anyone know if you can flash a d500 with a usb cable i use the serial cable with 9 volt connector and corona downloader but this takes an hour and a half to flash
need to know if you can use usb cable with corona cause ive been told flash time is down to 20 minutes
20mins??? .. more like 7mins , with modded usb cable
merten3000
23-04-2005, 08:44 PM
20mins??? .. more like 7mins , with modded usb cable
@Fr33s0ft:
7 minute flash... Sounds great.
Did you try it yourself?
And where do you order such usb cable? Allgsm.co.uk??
Greetz Merten
fr33s0ft
24-04-2005, 10:21 PM
yes tested & working 101%
Keypad up, right to left-
1 <-> 14- +Ubat
2- Usb data
3- Usb +5V
4- Usb data
5- Tx (Тх from maxim)
6- Rx (Rx from maxim)
8 <-> 11- GND
merten3000
24-04-2005, 11:14 PM
yes tested & working 101%
Keypad up, right to left-
1 <-> 14- +Ubat
2- Usb data
3- Usb +5V
4- Usb data
5- Tx (Тх from maxim)
6- Rx (Rx from maxim)
8 <-> 11- GND
So I can order the usb cable frm allgsm.co.uk??
And what are the settings above? (Keypad up, right to left- ???)
Thanks anyway
fr33s0ft
28-04-2005, 08:02 AM
schematic to make own cable , if you have com port cable with 9v power , you can use this com port overclocking app which will speed things up ..around 10mins in supported chipsets , for Xp users , use the file... shswxp293b.zip for win98 use the other file , as i said this is only working in GOOD chipsets.
fr33s0ft
merten3000
28-04-2005, 08:15 AM
schematic to make own cable , if you have com port cable with 9v power , you can use this com port overclocking app which will speed things up ..around 10mins in supported chipsets , for Xp users , use the file... shswxp293b.zip for win98 use the other file , as i said this is only working in GOOD chipsets.
fr33s0ft
Thanks fr33s0ft!!
I'm not good at making my won cables :( and my chipset is not supported...
but I ordered a USB flash cable which I will try.
It has a FDTI chip. That has to be great they say....
I will try
http://szone.boxke.be/forum/viewtopic.php?p=5535#5535
Greetz Merten
merten3000
28-04-2005, 10:19 PM
Thanks fr33s0ft!!
I'm not good at making my won cables :( and my chipset is not supported...
but I ordered a USB flash cable which I will try.
It has a FDTI chip. That has to be great they say....
I will try
http://szone.boxke.be/forum/viewtopic.php?p=5535#5535
Greetz Merten
Used the usb flash cable and TFS+BIN was done in 17 minutes with NO problems!!!! Woohooo :-D
tee2nu
04-05-2005, 08:35 AM
Where did you buy your USB flash cable with FDTI Chip? I need to purchase one. Thank you! :-)
gsm-magic
06-05-2005, 10:56 AM
i have win imei for d500 when i open and click write there is a request for password it looks for server what password i have keygen but what do i put in it and also the new button is hidden i used to have software that would activate it but i cant remeber what it is called anyone help please :-?
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.