PDA

View Full Version : ProjectZ 3310 to 3330 trick!



enzo
18-10-2002, 01:30 PM
Hi guys and girls.

Many people asked if we could do PrjZ for 3330, therefor I write a little manual hot to "convert" 3310 to 3330.

If you've downloaded PrjZ for 3310 U'll have only MCU+PPM.
Now extract the files into a directory: C:\Files , for example.

OK, now U have to paste your eeprom, or a new virgin eeprom, behind the flashfile.

In Windows9x: copy /b prjZ3310.fls + eeprom.fls output.fls
In WinNT based: copy /b prjZ3310.fls + /b eeprom.fls output.fls

If you have done well, U'll see that the File must! be 2.048 KB.

I think that we all are smart enough to do this. :)

OK, if the file is 2.048 KB big, do the following steps:

1. U must copy the file behind it self so:

copy /b output.fls + /b output.fls finalflash.fls

I hope U understand it. If not post. ;)

Greetingz from Germany
[enzo]

thanasis
18-10-2002, 01:38 PM
Enzo
can you do that for 3330 with no trick ? 3330 has 4096kb fullflash.

NokiaPhreak
18-10-2002, 01:47 PM
I think enzo already tell you how to do it, just copy enzo 3310 flash file twice to make a 4096k flash file.

ex.

copy /b prjZ3310.fls + /b prjZ3310.fls + /b 3330virgineeprom.fls 3330full.fls

enzo
18-10-2002, 01:54 PM
@thanasis:
mate, why do U want to have a real 3330 file?

U only will lost WAP, but thats not useful.
Therefor U'll have a this MOD!

MAybe, but I don't think so, we'll do 3330prjZ.

Greetingz from Germany
[enzo]

PS:
@NokiaPhreak
I think U did a unintended mistake, it's:

copy /b prjZ3310.fls + /b 3330virgineeprom.fls /b prjZ3310.fls + /b 3330virgineeprom.fls 3330full.fls

(I think file will be to small and not functioning, but maybe Ur right, cause I don't own a 3330 ;) CU)

thanasis
18-10-2002, 02:08 PM
I understand how to do 3310 to 3330.but i don't want to lose Wap,that's why i asked if you can do a 3330 prozectZ

liteFun
18-10-2002, 02:24 PM
i wish i had 3330 or 3310.. but i have only 5510.
3330 flash will fit to 5510 and work EXCEPT KEYBOARD.
i tried to flash 3330 flash to 5510 months ago, thought it will be ok with numeric keys, but no.
has somebody studied difference in 3330 and 5510 keyboard controlling?

KnokKnok
22-10-2002, 04:39 PM
This is no trick!!!

100% working 3310 ProjectZ to 3330

1. using rolis 4.77/4.78 download the flash file from 3310 containing projectZ. Ignore the error just save the file. This one will give you 2MB flash file.
2. Flash the file to 3330 starting at 200000.
3. Flash again the file starting at 400000.
4. Repair IMEI, SP Lock Clear, Calc faid.
5. Now your 3330 is 3310 with ProjectZ.

Sometimes you will not get signal but try to use other software to calc faid.

WAP Will be out (anyway this is not usable, I use GPRS), animation will be out also (you can use g3nolite 1.0 to inject slideshow).

Hope this one will help. :) :) :)

nidoh
23-10-2002, 09:01 AM
Nothing Happens enzo...

I flashed it on my phone nothing happens instead i got a dead phone..

Maybe you should check it..
Or post/attached the file here...

Including the 3330 fls that you said..

robz_arson
25-10-2002, 07:05 AM
where can u get this slideshow injector? is it applicable to other units? (nokia)

NokiaPhreak
25-10-2002, 08:16 AM
Originally posted by robz_arson
where can u get this slideshow injector? is it applicable to other units? (nokia)

Look at this thread (http://nokiafree.org/forums/t5876/s.html)
and this
thread (http://nokiafree.org/forums/t7337/s.html)
and this new one
thread (http://nokiafree.org/forums/t7863/s.html)

get g3nolite there, it work with most DCT3 phone flash file.