PDA

View Full Version : Gx15 Help



MEDUMB
02-07-2005, 11:37 PM
How Do U Unlock A Sharp Gx15 Using Bluetooth

MEDUMB
03-07-2005, 12:10 AM
Plz Help :???:

congdanh_na
26-07-2005, 10:27 AM
I have found this reply from gsmhosting.com ,and I re-post for you .Good luck !


How to unlock GX15 using a bluetooth dongle and no data cables

COMPLETE step by step

0º. Create a folder called say, Allsharp, and extract the enclosed rar file to it

1º. Open the Allsharp folder that we created

2º. Run the "nec_sharp_reg" file that includes the software into the registry.

3º. Run the "InstallOCX.bat" file

4º. Copy the "MSCMM32.OCX" file into the C:/Windows/System folder

5º. Now run the "ALLSHARParm.exe" software

6º. A pop up window will open, just click OK and the program will run

7º. Activate the bluetooth in the sharp gx15 for example

8º. Exit the phone settings until we are in the main window

9º. Turn off the phone

10º. Remove the battery and the SIM card.

11º. Put the battery back, but not the SIM card

12º. Turn on the phone, the BT logo must be in the top of the phone.

13º. Open the BT in windows and follow this path: Quick Connect>Serial Port>(and the serial port number that we have on the phone, in my case it was the 8.

Look for the phone in the connected apps

14º. Go to the All Sharp ARM window that we opened first (it must be behind all the windows we have)

15º. Select "Liberar GX15/GX30" (unlock GX15/GX30)

16º. Select, from the scroll menu "Serial USB Port" the port where we have the BT (in this case it was 3).

17º. Select "Aplicar" (apply) in the Allsharp ARM

18º. The phone is now in unlocking mode (you will see that the phone is off and the screen only shows ****)

19º. In the Allsharp ARM window, there should be a code to follow, located in the left part of the software. (In my case, it goes like this:
Press 1
Press 99
pulse the upper right key (in the phone)
press 3
pulse the upper right key
press 1
Now it will show "finished" in the screen, then press 3 times the upper right key

20º. Input the code in the phone, as you press the first number, the phone lights up

That's it, if you did the steps right, the phone is now unlocked

NOTE 1 - This software is available elsewhere on the forum, but I am not sure whether this is a hacked version, but this does include the bat and reg files needed.
NOTE 2 - You will probably need a sim card that the phone is locked to, to activate bluetooth

distraido
06-08-2005, 12:57 PM
i followed the instructions and the phone went dead, it's reseting
what can i do??