Cannot reset faid after flashing 3310 with NokTool

[safeashouses]

I flashed my 3310 with a spy phone flash but cannot reset faid.
Useing NokTool all i get is "failed to initialyse local mode".

Anyone have any help to set faid.

Cheers
Sm

[mestrini]

Looks like hardware problem to me... should it be cable, pin contacts or phone itself

Still if you wanna be sure just reflash with original sw and try to set FAID to see if it works

[safeashouses]

i think it must be the fbus lead aswell.
I have had it going before.

Is there a way to test the lead with a meter.

Is there a pic of the pin outs?

The other problem i have is i fooked up a flash on one of these 3310, but now it will not switch on. So i cannot flash the back up back to mob.

Any help on this one aswell?

Cheers

Sm

[safeashouses]

now i have flash the 2 phones with there back ups and got them back to before i tried to flash them.

Just need to get a new or fix my mbus cable now.

I have just got it to work, but only once.

I might uninstall my s/w and try again.

thanks for your help
Sm

[safeashouses]

thanks for your help mestrini.
Fixed it, what i had to do is keep clicking the read button about 20 times to get it to read.

I used dvirus666 flash and cracked it first time.


I have only been flashing for about 4 or 5 days and i have cracked it with the help of you and this forum.

As allways, the best thing to do is search and read. Well alot more reading.lol

Time to pay me subs to this site i think.


Sm

[mestrini]

thanks for your help mestrini.
Fixed it, what i had to do is keep clicking the read button about 20 times to get it to read.

I used dvirus666 flash and cracked it first time.


I have only been flashing for about 4 or 5 days and i have cracked it with the help of you and this forum.

As allways, the best thing to do is search and read. Well alot more reading.lol

Time to pay me subs to this site i think.


Sm


:grin: I'm glad i could help m8

Still, consider trying the MBUS cable with other phones to see if it works the same way or try to open the phone and clean the contact pads on the board

cheers and congrats