PDA

View Full Version : maxim dongle


JacekPoland
22-10-2002, 02:04 PM
I creat my own maxim dongle and my dongle ID is 5555 when I program Atmel my CRC was 4A44 what I should do . Is my dongle work correct could some one tell me THX in advance



oki I just change in Bios my ecp+epp to oly epp and now I have 4A44 and its work verry fine . My second question is where I can find direct unlocker for dongle and map creator 3.0 Best regards
micrograph99
22-10-2002, 07:51 PM
which schematic did you use? can you post the schematic or point me to where you found it?



Thanks
JacekPoland
22-10-2002, 07:57 PM
I use this schematic whit connect to pin 10 GND and its work fine
micrograph99
23-10-2002, 06:54 AM
Pin 10 GND? do you mean that you connect PIN10 of the AT89C4051 to ground?

or PIN 10 of the DB25 to ground?


Thanks
JacekPoland
23-10-2002, 01:31 PM
AT89C4051 pin 10 connect to GND becouse on schem thar is not connect but 10 pin of mikrokontroler need GND on pin 10
Sixth`SenSe
23-10-2002, 04:57 PM
change LPT port setting to EEP
alex yong
24-10-2002, 09:22 AM
which software programme is using this dongle?
is the map creator is using this dongle?
JacekPoland
24-10-2002, 11:54 AM
this dongle use maxim software map maker and direct unlocker
alex yong
25-10-2002, 04:59 AM
where can i get or download this software programme?
JacekPoland
25-10-2002, 05:18 AM
at this adress its everything you need http://www.odblokgsm.sk/download/
alex yong
26-10-2002, 07:46 AM
thank's mate
jonis2002
29-10-2002, 04:06 PM
Hi,

I wanted to ask how much cost to build your own maxim dongle? And did you programed *.bin or *.hex file and with what program? I have only *.bin file, but programer which i found supports only *hex files. Is it possible to rename or convert this file?

Thanks for answer
JacekPoland
29-10-2002, 04:47 PM
I don't know hom much cost things to build maxim dongle in your country but in mine it's not that much but programer it's quite expensiv I Hve programer Combo 2 it's made by polish and software its write by same man whos creat the programer best regards
Wodek
29-10-2002, 09:20 PM
Jacek, I wonder one thing...
If you have built your own dongle key, is there any chance to make, generate, or write a *.kpe file, to Dongle Emulator? (maybe: File -> New File; Function -> Enable Capture)? What do you think?
Have a nice day...
JacekPoland
29-10-2002, 09:30 PM
I think it's hard to do becouse all algrithm of IMEI and unlock is in dongle and for one IMEI dongle send other packed of bites and for another other Best regards Wodek contack me on GG at number 5253211 Best regards
jonis2002
30-10-2002, 08:17 AM
Hello,

JacekPoland, our country currency is allmost the same 1zlot=1litas (I live in Lithuania). So electronics parts will cost the same money. I am not specialist, I will have to pay for all components soldering together (assembling together). Also I will have to pay for programing dongle chip. I think those things can do in electronics repairing/selling firm.

So if it is not secret, can you answer how much costs elecronics parts and assembling them by scheme (or you did this by yourself?). And one more thing, did you programed *.bin or *.hex extension file?

Best regards
JacekPoland
30-10-2002, 10:31 AM
hi AT89C4051 its cost me 12zloty rest of dongle qwartz and cappicorts and LPT connectors Db25 10 zloty and I use bin file to upload to mikrocontroler its not much and make this schem its verry simple Best regards
srtech
30-10-2002, 10:43 AM
hi all

this soft and shematic.work with any PC
jonis2002
30-10-2002, 01:08 PM
Thanks for yours replies