PDA

View Full Version : ufs3 firmware



sivaprasad
25-10-2005, 06:39 PM
respected members,
irequired UFS3 tornado firmware files like ufs3v2.6.7.fib or higher file to upgrade my box

THE FOX
25-10-2005, 09:36 PM
GO TO.....

http://www.ufs-3.org/info.asp

OPEN SUPPORT....

choose UFS3
Enter your box serial..

It will let you into the support area, firmware, flashes, software...

GOOD LUCK

neilthirumuttam
28-10-2005, 12:26 PM
which tool u r using to upgrade to avtivate BB5

THE FOX
31-10-2005, 02:53 AM
just run the new nokia software, it should ask you if you want to upgrade your firmware in the box...

also look here...

http://www.schwantz-i.com/zip/ufsxc0de.zip

look for the password in the forum...

neilthirumuttam
05-11-2005, 01:53 AM
do u know
how to upgrade box 2 bb5 without
fixing hwk
emulating hwk ?

andre128
02-12-2005, 10:51 AM
you need short the 2 pin for your box

andre128
02-12-2005, 10:56 AM
then flash your box with this (either one)

neilthirumuttam
04-12-2005, 06:59 AM
you need short the 2 pin for your box


pls give me the details regarding the shoring

alexmam_80
04-12-2005, 01:01 PM
Open UFS3Tools
Conect- Put to update Firmware and eeprom in V2.5 and push Fix&Updare
Close

neilthirumuttam
05-12-2005, 02:17 AM
pls link to these
thanks in advance

andre128
05-12-2005, 12:13 PM
pls give me the details regarding the shoring


open the ufs-3 box connect then pin like the picture the use hwk raskulator flash the box

then use dctx bb5 test 10 for bb5, sams v1.4u, kzf v1.8b, LG v1.0a...

if you use the latest version, you can't use hwk function

andre128
05-12-2005, 12:19 PM
ufs3 tools (for update firmware v2.6)
http://www.geocities.com/nokia7610a/ufs3tools.zip

HWK raskulator
http://schwantz-i.com/~arash/hwk-emulator.zip

neilthirumuttam
06-12-2005, 02:48 AM
is there any new cracked exe s for
lg?
igot the nok sam & kzf

neilthirumuttam
06-12-2005, 02:46 PM
As u told I upgraded the box thruufs 3 tools
but the hwk area is different
that y icant short the points
there are only six ponts.
now when im trying to connect the box
it shows an error message
"Unexpected Exception:BOX_AUTH_ERROR:31",

Do u have any idea?
pls help

andre128
07-12-2005, 04:16 AM
Ooh... you're using clone box... you've use other method... i'll post the pic

andre128
07-12-2005, 05:22 AM
here the solution for clone ufs box

neilthirumuttam
08-12-2005, 02:44 AM
thanks u r great
yes ishall try and post the result tommorrow
thank u

neilthirumuttam
10-12-2005, 02:08 PM
As u told I shorted the two pins of the FTDI chip
and tried again , when trying to connect inthe exe
still the result is
"it shows an error message
"Unexpected Exception:BOX_AUTH_ERROR:31",
in what way I can get my box working?

neilthirumuttam
13-12-2005, 03:45 AM
As u told I shorted the two pins of the FTDI chip
and tried again , when trying to connect inthe exe DCTX
still the result is
"it shows an error message
"Unexpected Exception:BOX_AUTH_ERROR:31",

in what way I can get my box working
with UFSx_Dctx ?

but for sam or UFS_KZF it works& screen says
"UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1
UFS_USB V2.6 (c) SarasSoft 2005. S/n: 50000
HID: 33C9F72E00000000
HWK: A1.02-TEST
Licence: True "
0nly with nokia exe it says the error!

andre128
14-12-2005, 12:13 PM
which version dctx you use??? cracked version must use v1.4 test 10(for flash bb5), v1.4 test 14(not stable)...

dont use v1.3m, v1.4a,v1.4b, v1.4c...

neilthirumuttam
16-12-2005, 03:46 AM
pls a link to the cracked version which
is the best that u feel

andre128
16-12-2005, 07:09 AM
http://www.djawir.com/donlot/index.php?dir=GSM%20Phone/Nokia/&file=DctxBB5_14a_.rar

http://www.djawir.com/donlot/index.php?dir=GSM%20Phone/Nokia/&file=DctxBB5_14_ALM.rar

http://www.djawir.com/donlot/index.php?dir=GSM%20Phone/Nokia/&file=DctxBB5_mikrocell.exe

http://www.djawir.com/donlot/index.php?dir=GSM%20Phone/Nokia/&file=DctxBB5_Tst14.rar

http://www.djawir.com/donlot/index.php?dir=Repair%20Tool/Saras%20Box_UFS-3_Tornado_Twister_N-Box/&file=DctxBB5_14a_TST10.rar

neilthirumuttam
21-12-2005, 04:53 AM
I again done every thing form the very begining

shorted the two pins

1. with mprog i wrote the ufs good ept
2. with ufs tool emulated hwk
3 calculated the strings and connected

still with nokia it shows the error
"un eoxepted exeption: BOX ERROR: 1020

previous error code now changed

but to samsung & se it works
what myay be possible fault
iused allthe exes from the link
said above
14 tst reures encription password
that i dont hve
allthe others the same result

nijascm
26-12-2005, 08:43 AM
here i cracked the ufs
but the problem is that .i can't get a bb5 setup v 14 tst.the link above is working.but it asking password .plz gie me a link for bb5

andre128
26-12-2005, 09:08 AM
get it here

nijascm
26-12-2005, 11:43 AM
thanx a lot
i will try and inform u if any problem
nijas from sizcom calicut

nijascm
27-12-2005, 08:52 AM
hi friend
here i succesfully done all the work
but the problem is that 6630 is now dead after flashing
i tried with two different files .flashing copleted and rebooting mobile message is appeared but.the phone is not turn to on


give me a solution

andre128
27-12-2005, 02:06 PM
what cable you use? i use 7 pin batt with 9v batt

select .cor as mcu, and any ppm you want

nijascm
27-12-2005, 04:11 PM
here i using cloned ufs with 5 pin
i think its flashing is success.in first i forgot to check the version of sw in phone i guss it is 2 or 3 .i flashed it with v 5.is ithe phone need correct version of software .do u have any idea

andre128
28-12-2005, 07:59 AM
5pin cable need with vpp, to flash bb5 need more than 10 min to finish, only can upgrade can't downgrade...

do you have screen shot after flashing?

nijascm
29-12-2005, 01:32 PM
yes "flashing completed and rebooting mobile ".its the last message.its take nearly 8 minitue.here ihve only get 5 pin cable.i dont know how to connect other connector with vpp.is my phone will work if i flashed it with an original hwk ufs.plz reply me.i flashed it with all version.screen shot is in my computer but i dont know how i post it

andre128
30-12-2005, 05:33 AM
BB5 phone VPP adapter for UFSx HWK
For switching the 9V of BB5 over sarasbox (e.g, N-BOX,UFS3, TONADO ,Twister, incl clone twisters) & UFSx HWK

neilthirumuttam
03-01-2006, 03:02 AM
I again done every thing form the very begining

shorted the two pins

1. with mprog i wrote the ufs good ept
2. with ufs tool emulated hwk
3 calculated the strings and connected

still with nokia it shows the error
"un eoxepted exeption: BOX ERROR: 1020

previous error code now changed

but to samsung & se it works
what myay be possible fault
iused allthe exes from the link
said above
14 tst reures encription password
that i dont hve
allthe others the same result








pls some one help meeee..........

andre128
03-01-2006, 07:27 AM
ai yaa..... why you use mprog???? i didn't tell you... that method for cracked v1(need strings)

now v2 no need already mah... and now can support sams v1.4w

now, you need reprogram you box...
http://www.schwantz-i.com/zip/UFS_Maintenance_v20.zip

nijascm
03-01-2006, 11:41 AM
i do teh folowing steps
1 changed my ufs serial number by ufs maitainance soft
2 upgraded the firm version to 2'6
3 emulate hwk (after copleting this windows shows an error) and shorted the ic of my cloned box
4 down load bb5 test
5 down load all versins of 6630 files from ufs original site

part 2
the danger things is happening
6 flash the phone with version 5.08
after 10 miniutes flashing completed but................phone is dead
in here only rj45 cable
7 i flashed the phne with all version but all versionare same result
8 days are going flashing flashing flashing but phone is dead

9 lost my patient and go enqire about hwk
10 go to one shop thats 225 km far from me and give 40 dollar

11 they flashed my phone and return me in ok condition
12 i stopped my experiment

andre128
04-01-2006, 05:11 AM
flash wont kill your phone except the flash chip damage

neilthirumuttam
06-01-2006, 04:03 AM
[This error started after updating inUFS3 Calc Sring & HWK Emulator
byDC ITC Bdg
as u mentioned above
after that I said in this forum
nobody responded that is y I tried in mprog
and got working in se and samung
only to the nokia exe it shows the error
I alredy tried this
in UFS maintanace also
the result was same

every sujession foung in this forum done stil....

I think that u can help .

neilthirumuttam
07-01-2006, 02:31 AM
ai yaa..... why you use mprog???? i didn't tell you... that method for cracked v1(need strings)

now v2 no need already mah... and now can support sams v1.4w

now, you need reprogram you box...
http://www.schwantz-i.com/zip/UFS_Maintenance_v20.zip

andre..
This error started after updating inUFS3 Calc Sring & HWK Emulator
byDC ITC Bdg
as u mentioned above
after that I said in this forum
nobody responded that is y I tried in mprog
and got working in se and samung
only to the nokia exe it shows the error
I alredy tried this
in UFS maintanace also
the result was same

every sujession foung in this forum done stil....

I think that u can help .

andre128
07-01-2006, 05:16 AM
try fix the problem with ufs3 tools i've posted before...

josetolo_jr
07-01-2006, 10:06 AM
Hi mate,

Do you have the above soft?, please if you could share with us.

Thanks & best regards
josetolo_jr

neilthirumuttam
08-01-2006, 03:52 AM
pls postUFS FIRMWARE V2.6.7 or higher
to upgrade the box
fbi file....

neilthirumuttam
08-01-2006, 04:01 AM
try this or u can find it from net itself

josetolo_jr
08-01-2006, 05:17 AM
try this or u can find it from net itself
Thanks very much mate. I will try to emulate HWK. Have you tried this if you have thge trial HWK?

Here is the UFS Firmware v2.6.7

BR

nijascm
08-01-2006, 06:55 AM
hi
try this attachment to solve the problem of unexpected error in the box

nijascm

neilthirumuttam
08-01-2006, 11:01 AM
use this link to find different tools for different tools whiv u trying to find

http://www.djawir.com/donlot/index.php?dir=Repair%20Tool// Saras Box_UFS-3_Tornado_Twister_N-Box

thanks

neilthirumuttam
09-01-2006, 03:25 AM
Thanks very much mate. I will try to emulate HWK. Have you tried this if you have thge trial HWK?

Here is the UFS Firmware v2.6.7

BR
u dont forget 2 read allthe posts in this thread
1000% ok ucan emulate hwk
and solve all the possible error from this thread
see page1 and read.....
all the best

neilthirumuttam
10-01-2006, 04:40 AM
UFS3 DEVICE NOT FOUND HADWAREPROBLEM?


recently i got another box which is not detected. only the two LED
ligts
I tried all that i know
used mprog it finds no device
tried with all saras tool that i
found on the net
result is the same

opened the box, resoldered all the major components
replaced the crystal . what my be the possible fault?
ATMEGA is ok . it is tested on another box found working

Any xperianced hand pls respond

nijascm
10-01-2006, 06:56 PM
here the screen shot of 6630 flashing with cracked hwk
i used cloned box,and all the success symbol i got when cracked,ie hkk ts1 appeared 0000001 true all r fine.iflashed my 6630 flashing is completed but set is not powering on.i flashed the same set ina original hwk enabled box that works fine .wha happend to me


nijas sizcom

nijascm
10-01-2006, 07:08 PM
here the second screen of 6630 flashing

nijascm
12-01-2006, 02:42 PM
hi 6600 flashing failed
problem reported: it shows hanging ,and very slow to open files
action taken :try to flash it with a 5.53 file ,then first some steps r o.k but,flashing is not work ,but set is same condition on
then i erased the file with full erase file ,then it coplete and shows the write error
then i try to reflash it with one good file the resul is same

see the scrren shot wherre is the problem,

neilthirumuttam
13-01-2006, 02:36 PM
may be hardware pblm
heat flash ic try again

search this key word" 6600 poroblem solved" on net

abee.calips
20-06-2006, 12:53 AM
ai yaa..... why you use mprog???? i didn't tell you... that method for cracked v1(need strings)

now v2 no need already mah... and now can support sams v1.4w

now, you need reprogram you box...
http://www.schwantz-i.com/zip/UFS_Maintenance_v20.zip


i got problem downloading "UFS_Maintenance_v20.zip" it will always redirect to other site.. can anybody gives other link where to download this software..

neilthirumuttam
20-06-2006, 03:54 AM
use this
and post the result