PDA

View Full Version : 6210 sec unlock,3310v5.47 unlock software



frannokiafreak
23-10-2002, 02:22 AM
hi,please help i'm going mad!!
i've got nokia flasher leads and i've flashed some nokia phones with different software i've even up dated software

but the problem is i've a 6210 with the software upgraded but i've a security lock on it!!
is there a way to view it or reset it please e-mail me!!!1

also i've a 3310 with v5.47 on it i cant seem to find software to unlock it if you can help please let me know>>>

remember the software has to be for flasher cables only!!!

many thanks
frannokiafreak

:( :( :(

polished
23-10-2002, 03:35 PM
you could read off the eeprom and use nkcalc to view the security code and reset it:)

gabiz
23-10-2002, 08:12 PM
Hello I have similar problem when upgrading 3310 to3315 standart security 12345 code don;t work, code read from phone by some software don;t work if you have software to make a restore factory setings try this and try to chane sec.code and default is 12345 ,but why don;t you use a mbus cable?

polished
24-10-2002, 12:52 PM
If you read the eeprom and save it as xxxxxxx.fls, use NKCalc. The 5x wrongly entered security code problem with 3310,
6210, 7110, 8210 Nokia Phones.
Read the eeprom and save as xxxxxx.fls
start NKcalc http://www.g7ecd.gasbags.net/download/NKCalcprog.zip

open the xxxxx.fls file you have just saved

and find the security code.......the rest of the instructions are here
http://www.g7ecd.gasbags.net/NKCalc/5xwrong.htm


hope this helps.

oldsindbad
14-11-2002, 12:05 AM
it is not working. this link is dead . have they moved somewhere else.
thanx in advance


regards from a traveller
:D

polished
21-11-2002, 03:55 PM
Will put together a doc and send to you.

oldsindbad
22-11-2002, 12:52 AM
thanx in advance man


this will be a good help.


I actually suffered from this problem again and agian

Yet no solution
would be greatful if U send the docs to me.


regards from a traveller.

goodlab
13-12-2002, 04:56 PM
:) hi polished!

can u please send ur copy of nkcalc in this forum and the complete instructions in resetting the 6210 security code.
i need them so much.
thanks!

merry x-mas!

--Labs--

oldsindbad
14-12-2002, 12:05 PM
I found out the following :

about the 3310

try to use Rolis 1.8

I used this software and never let me down.
for all 3310s and even 3330 of newer versions.


about the 6210
I found out that after U unlock the phone just wait like 15min and then try to give the 12345 code and tada it will work (unlock using Rolis1.8) coz this type of phone have a special counter for Security Code that needs to be reset. and if U let the phone on for a while ( not sure exactly some people says 2min others says 2hr, what I tried is 15min) then try to give the code.
Just leave the phone on ( turn the phone on ) for a while.



regards from a traveller