Knok95 Problem (3310>3315)

[notacake]

I tried following Chunkheads guide to upgrading 3310 to 3315, I flashed the to 6.33, set the FAID, reset the UI settings, full factory reset, then tried the "Convert 3310 into 3315" and I get this:

MBUS_SecurityCommand : cannot execute 'Set profile'
MBUS_Set3315Flag : cannot set profile

Sorry if this has been answered before but I've spent the past 4 hours searching these forums and the rest of the net, to no avail. It's really starting to piss me off now.

Here's the full debug messages if they help:

misc_calibrate_delay : 1536.81 BogoMIPS
MBUS_OpenCOMPort : opening COM1 with delay 100
FLS1_GetFlashParameters : parameters found NHM-5(3310) - DCT3BT2.TIA
MBUS_cmd : size of command is 12
1F 00 10 40 00 04 00 01 64 01 01 2E 1F 10 00 7F
01 71 1F 10 00 40 00 0C 01 01 64 02 01 4F 0D 01
01 01 1B 58 56 72
MBUS_cmd : size of command is 12
1F 00 10 40 00 04 00 01 64 02 02 2E 1F 10 00 7F
02 72 1F 10 00 40 00 0C 01 01 64 02 01 4F 0D 01
01 01 1B 58 57 73
MBUS_cmd : size of command is 12
1F 00 10 40 00 04 00 01 C8 10 03 91 1F 10 00 7F
03 73 1F 10 00 40 00 25 01 01 C8 10 00 56 20 30
36 2E 33 33 0A 32 38 2D 31 31 2D 30 33 0A 4E 48
4D 2D 35 0A 28 63 29 20 4E 4D 50 2E 00 58 DB
FLS1_GetNMP : found model NHM-5(3310)
FLS1_GetPhoneInfo : MCU version is analyzed
MBUS_cmd : size of command is 12
1F 00 10 40 00 04 00 01 64 01 04 2B 1F 10 00 7F
04 74 1F 10 00 40 00 0C 01 01 64 02 01 4F 0D 01
01 01 1B 58 59 7D
MBUS_cmd : size of command is 12
1F 00 10 40 00 04 00 01 64 02 05 29 1F 10 00 7F
05 75 1F 10 00 40 00 0C 01 01 64 02 01 4F 0D 01
01 01 1B 58 5A 7E 1F 00 10 40 00 04 00 01 64 02
05 29 1F 10 00 7F 05 75
1F 00 10 40 00 04 00 01 64 02 05 29 1F 10 00 7F
05 75
64 02 01 4F 0D 00 00 40 00 04 00 01 64 02 05 29
1F 10 00 40 00 0C 01 01 64 02 01 4F 0D 01 01 01
1B 58 5A 7E
MBUS_sendcommand : invalid reply to command from phone
1F 00 10 40 00 04 00 01 64 02 05 29 1F 10 00 7F
05 75
1F 00 10 40 00 04 00 01 64 02 05 29 1F 10 00 7F
05 75 1F 10 00 40 00 0C 01 01 64 02 01 4F 0D 01
01 01 1B 58 5A 7E
MBUS_cmd : size of command is 11
1F 00 10 40 00 03 00 01 6A 06 21 1F 10 00 7F 06
76 1F 10 00 40 00 07 01 01 6A 30 00 00 50 5B 19
MBUS_Set3315Flag : old profile is 30 00 00 50
MBUS_Set3315Flag : new profile is 30 00 00 50
MBUS_cmd : size of command is 15
1F 00 10 40 00 07 00 01
MBUS_sendcommand : invalid reply to command from phone
6B 30 00 00 50 07 45 1F 10 3F 10 40 00 07 00 01
MBUS_sendcommand : invalid reply to command from phone
6B 30 00 00 50 07 45 1F 00 10 40 00 07 00 01 6B
MBUS_sendcommand : invalid reply to command from phone
00 03 01 01 6B 3F 00 10 40 00 07 00 01 6B 30 00
MBUS_sendcommand : invalid reply to command from phone
00 50 07 45 1F 00 10 40 00 07 00 01 6B 30 00 00
MBUS_sendcommand : invalid reply to command from phone
50 07 45 3F 3F 0C 3F 09 3F 3F 3F 3F 3F 3F 3F 3F
3F 3F
MBUS_sendcommand : invalid reply to command from phone
83 3F 2A 3F 1F 10 00 10 40 00 07 00 01 6B 30 00
MBUS_sendcommand : invalid reply to command from phone
00 50 07 45 1F 3F 00 10 40 00 07 00 01 6B 30 00
MBUS_sendcommand : invalid reply to command from phone
00 50 07 45 3F 3F 10 40 00 07 00 01 6B 30 00 00
MBUS_sendcommand : invalid reply to command from phone
50 07 45 1F 00 10 40 00 07 00 01 6B 30 00 00 50
MBUS_sendcommand : invalid reply to command from phone
MBUS_cmd : timed out after 10 tries
MBUS_SecurityCommand : cannot execute 'Set profile'
MBUS_Set3315Flag : cannot set profile
MBUS_CloseCOMPort : Closing COM port

[mestrini]

You can use other tools as Rolis Noktool 1.9 or (my favourite) DCT3 repair partner by Neb (DCT3RPv3.5.exe) and see if they work

look for links of both right here in the forum :D

cheers

[notacake]

NokTool works, but how can I use it to change a 3310 to a 3315?

[mestrini]

NokTool works, but how can I use it to change a 3310 to a 3315?


see pic where it says 3310 aditional menu ;)

cheers