cable error

[Doc]

Hi to all!

Does anybody have a clou why i just get: "Phone not connected!"
With B-Phreks Logger 2.0 and EEPROM Tools 3.0?

I have a fully configurable FBUS/MBUS manual switched and homemade cable.
It works 100% with logomanager, PCLocals, WinTesla, Logger1.2,
nk_calc, Rolis4,71-5.14, NokiaTool034/035, Roli#s NokiaTool...

Straange because just EEPROM Tools 3.0 and Logger 2.0 refuse to work /n/images/smiles/icon_frown.gif

Doc

[NokDoc]

I know Ur problem, it must be the bPhreaks proggy.

If I reboot PC it will work for 1 time, not the second.
All other f/mbus proggies I can use normal.

I have autoswitch cable, and it works in despite this reboot handicap.
Hopefully also for U.

NokDoc

[nokiaguru]

It might help if you put tape on rx/tx pins, so only one that contacts phone is
mbus and gnd pins.

[||Joe]

Dosn't really help i have a dual autoswitching f/mbus cable didn't work so i removed rx/tx entirely from the plug there was no difference at all (besides the fact that my cable looks kinda funny now /n/images/smiles/icon_smile.gif

[Yasser]

Hi

You need autoswitching cable for this......Mbus and Fbus......U can buy from anywhere.

Thanks

BR

yasser