NokDoc
09-03-2002, 12:29 PM
Wednesday I was happy, I finally managed to upgrade my 406 to 503, perfect working.
I used only kNok 11-7 (very nice proggy!) and loggerV20 for the job.
But afterwards I wanted to do some modificated PPM flashing.
Now this kNok start dissapointing me with messages as:
>FLS1_ConfigurateBootstrapDCT3 : checksum is F104
>FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
>FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
>Cannot prepare phone
I can't read/ write or start the Nokia anymore, sort of dead phone.
I had this once solved in Dejan prg with paper between accu and phone and remove it after it asks for press PhoneOn.
This trick doesn't work on kNok, and it's the only 'working' flash program out here.
I suggest the phone is running at this low level activity state for flashing even if it's off, is this the socalled 'bootstrap running'?
Little footnote: kNok is the only program working out here for flashing, dejan10 used to but not anymore for some reason.
Could someone help me out?
NokDoc
I used only kNok 11-7 (very nice proggy!) and loggerV20 for the job.
But afterwards I wanted to do some modificated PPM flashing.
Now this kNok start dissapointing me with messages as:
>FLS1_ConfigurateBootstrapDCT3 : checksum is F104
>FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
>FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
>Cannot prepare phone
I can't read/ write or start the Nokia anymore, sort of dead phone.
I had this once solved in Dejan prg with paper between accu and phone and remove it after it asks for press PhoneOn.
This trick doesn't work on kNok, and it's the only 'working' flash program out here.
I suggest the phone is running at this low level activity state for flashing even if it's off, is this the socalled 'bootstrap running'?
Little footnote: kNok is the only program working out here for flashing, dejan10 used to but not anymore for some reason.
Could someone help me out?
NokDoc