Line 1 symbol on 3310

[Kilrah]

Hi all.

I recently made a factory reset on my 3310 v.4.02 as there was some trouble with the security code (said it was wrong when it wasn't).
This problem is now solved, but the phone now always indicates the used line in the top bar. Normally a small '2' should appear when line 2 is selected, but now it also displays a small '1' in normal line 1 mode. does someone know how to remove this? It is annoying because it takes place for a more useful icon...

Thanks in advance

Kilrah

[Manipulator]

is the flash file you use is modifyed one,you need to reflash the eeprom,if the 1 still there ,give it a full flash(mcu+ppm+eeprom).

[Kilrah]

in fact I didn't flash anything, it's just the original soft
just made a full reset

[WildSwan]

Now you have to flash a virgin EEPROM.


Originally posted by Kilrah
in fact I didn't flash anything, it's just the original soft
just made a full reset

[Kilrah]

OK, I'll try this.
Still haven't built my flasher cable...

[Unikk]

___________________________________________________
I recently made a factory reset on my 3310 v.4.02 as there was some trouble with the security code (said it was wrong when it wasn't).
This problem is now solved, but the phone now always indicates the used line in the top bar. Normally a small '2' should appear when line 2 is selected, but now it also displays a small '1' in normal line 1 mode. does someone know how to remove this? It is annoying because it takes place for a more useful icon...
___________________________________________________

Hi Kilrah

Try Nk Profile Software and then click the ALS box then restart phone.

Or Nokia Tool by Jordik v3.21 under PPS section on the right side, click box nos 2 and 13 if 1 not 0 appeard to activate/deactivate Line 1/2 Options.

There are many softwares available but for me this two are the best. There you go with your Line 1/2 Phone line.


Unikk
Philippines

[Kilrah]

YEAAAHH

thx for reply! will try as soon as possible!

Regards
Kilrah

[Kilrah]

@unikk

Worked perfectly with nkprofile. No more annoying '1'!

Thanks again!
Kilrah

[WildSwan]

Do you have a complete definitions of those PPS values in Jordic? Pa share naman. Matsala.


Originally posted by Unikk
___________________________________________________
I recently made a factory reset on my 3310 v.4.02 as there was some trouble with the security code (said it was wrong when it wasn't).
This problem is now solved, but the phone now always indicates the used line in the top bar. Normally a small '2' should appear when line 2 is selected, but now it also displays a small '1' in normal line 1 mode. does someone know how to remove this? It is annoying because it takes place for a more useful icon...
___________________________________________________

Hi Kilrah

Try Nk Profile Software and then click the ALS box then restart phone.

Or Nokia Tool by Jordik v3.21 under PPS section on the right side, click box nos 2 and 13 if 1 not 0 appeard to activate/deactivate Line 1/2 Options.

There are many softwares available but for me this two are the best. There you go with your Line 1/2 Phone line.


Unikk
Philippines