3310 with SmarKies.. Shit.. I Realy Need Help..

[Dai0]

Hi, I am flash my 3310 with SmarKies flash file, and now i cant reflash my phone anymore.. and i can't change ppm or any else..
I am bad english.. sorry.. i am flom Lithuania..
So i use only Flasher interface by Dejan 2000.. and Knok Phoenix (built 1)
Now when i try to reflash my phone, this program
Says that my phone not NHM-5 but somthing else, like NMV-NHM5 or somthing like that.. i am just tired.. i can't do anything.. i am "green" flasher..
I just have a flash cablke just for 2 or 3 weeks.. please help me..
Thanx to all..
[email protected]
[email protected]
or
[email protected]

[Mr Wolf]

Try Rolis flasher!
Flash a valid (not patched) PPM and maybe you should flash a virgin eeprom too!

[Dai0]

Try Rolis flasher!
Flash a valid (not patched) PPM and maybe you should flash a virgin eeprom too!

But i dont know why rolis flasher doesn't work.. when i connect with Dejan flash cable and turn off phone rolis ask to press turn on phone, but when i press then nothing happends..
Maybe my cable works only with Knok? :confused:

[Mr Wolf]

I don't know, with Rolis sometimes it doesn't work when the adapter is not well connected to the phone, so you could try to connect and reconnect the adapter!
With Knok, when you try to flash you go to Write -> Write FLS flash file to phone, then it asks you to push the turn on button, but nothing happens?
You sure you have the right ppm.fls?
Try these ones:
http://www.id2.cz/partial.htm

[Dai0]

When i conect my 3310 to flash cable,
then turn on knok,
knok asks to Press power on (if needed),
when i do this knok shows:




Lead's kNok-Phoenix - build 1
based on kNok - Engine build 22, Frontend build 18

Thanks goes out for the following:
Dejan, Kodo, Viper, Jozso (for hardware and cable support
and of course beta testing), Bph&Co, Saras, IceDragon,
Steina, Epilog, Invisible, Jethro, H-tom, AlAraf, Lead
and all the others who supports knok...
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : detected NMP is NHM-5.
FLS1_PreparePhone : not supported NMP - NHM-5.
Cannot prepare phone


Its is all..
But other phons flashes succesfully...

I think it is Flasfile is somehow secured and i can't doanything.. :confused:

[Mr Wolf]

Can you tell me where you downloaded Smarkies flash from?

[Dai0]

Can you tell me where you downloaded Smarkies flash from?
I download smarkies flash in http://www.geocities.com/citsikatz/smarkies_simbayan_v3.zip
They are 3 diferent versions but i download v3..
Thanks for help!

[Dai0]

Try Rolis flasher!
Flash a valid (not patched) PPM and maybe you should flash a virgin eeprom too!
maybe rolis flasher doesn't work becouse i using Windows XP and i do not instal USERPORT?

[Mr Wolf]

AZZZZZZZZZZZ!!!!!

That's the problem! Under XP to use flash programs you must install userport!

[Dai0]

AZZZZZZZZZZZ!!!!!

That's the problem! Under XP to use flash programs you must install userport!
BUT, wirh Knok i flashes not one phone\, even in my XP is not install user port.. i vill try to install and use rolis flasher.. thanks for help

[SmaRkieS]

Hi, I am flash my 3310 with SmarKies flash file, and now i cant reflash my phone anymore.. and i can't change ppm or any else..
I am bad english.. sorry.. i am flom Lithuania..
So i use only Flasher interface by Dejan 2000.. and Knok Phoenix (built 1)
Now when i try to reflash my phone, this program
Says that my phone not NHM-5 but somthing else, like NMV-NHM5 or somthing like that.. i am just tired.. i can't do anything.. i am "green" flasher..
I just have a flash cablke just for 2 or 3 weeks.. please help me..
Thanx to all..
[email protected]
[email protected]
or
[email protected]



Good day to you.. Mr. Dai0
regarding on my flash files I and my other friends dont have any problems with it. There are thousand of people downloading my flash files.. and no complains about it. :)

try to read the README file it is stated that you need to FUBU (Full Back Up)your phone before Flashing.

Mr Wolf is right you need to install USERPORT which is required.. so that you can flash your phone. if your a WIN98 user you dont need to have this.

[Dai0]

Good day to you.. Mr. Dai0
regarding on my flash files I and my other friends dont have any problems with it. There are thousand of people downloading my flash files.. and no complains about it. :)

try to read the README file it is stated that you need to FUBU (Full Back Up)your phone before Flashing.

Mr Wolf is right you need to install USERPORT which is required.. so that you can flash your phone. if your a WIN98 user you dont need to have this.

I hope.. but i install user port, run drivers, bu any program whitch i used, all programs just say "bad phone type" or "the pone model not suported" "bad phone model" if you realy can halp then i record a tutorial on my desktop to you.. maybe you can help me.. i think your's flash file is protected by changing the SW version or something right that..
I trie tu flash my fathers 3310, it flashes PERFECTLY, but when i try to erase flash or reflash my 3310 with your's flash, then any program nothing do :(
Yesterday i broke up my 3310 with unreal smarkies flash file, i used rolis flasher, and tryte to flash with L ppm pack (6,39) versio, bujt after that phone not power on, and any of my programs, can't reflash the phone.. i dont know, what a shet happends..

[Dai0]

OK, vith rollis flasher i erase all flash from phone and reflash, now i just won to please you Smarkies, if you can give me your's full flash but with L ppm ;-) i want have same flash (unreal flash) with my home language :) Lithuania :)

[SmaRkieS]

I hope.. but i install user port, run drivers, bu any program whitch i used, all programs just say "bad phone type" or "the pone model not suported" "bad phone model" if you realy can halp then i record a tutorial on my desktop to you.. maybe you can help me.. i think your's flash file is protected by changing the SW version or something right that..
I trie tu flash my fathers 3310, it flashes PERFECTLY, but when i try to erase flash or reflash my 3310 with your's flash, then any program nothing do :(
Yesterday i broke up my 3310 with unreal smarkies flash file, i used rolis flasher, and tryte to flash with L ppm pack (6,39) versio, bujt after that phone not power on, and any of my programs, can't reflash the phone.. i dont know, what a shet happends..

Flash it with a VIRGIN FUBU. It's not actualy a V6.39 i just change it using a script.. the original version is v5.57.

Bad phone model coz you might be flashing a V6.39 FLASH file which is the latest flash and some or most of the flashers dont support flashing a V6.39 Hardware phones.

I flashed my phone which is the original Flash v5.57 Hardware. hundred times hmmm 400+ times maybe so far i dont encounter with that kind of problem.

[Dai0]

Flash it with a VIRGIN FUBU. It's not actualy a V6.39 i just change it using a script.. the original version is v5.57.

Bad phone model coz you might be flashing a V6.39 FLASH file which is the latest flash and some or most of the flashers dont support flashing a V6.39 Hardware phones.

I flashed my phone which is the original Flash v5.57 Hardware. hundred times hmmm 400+ times maybe so far i dont encounter with that kind of problem.

Aaaaa! thats the problem! i bee'n flashed v6,39 :)
Please, help in another problem, i wantr to can change language in your flash, then i add language with PPM maker then flash it to phone, then phone don't turn on.. say me how i can change languages in any flash file.. thanks

[SmaRkieS]

Aaaaa! thats the problem! i bee'n flashed v6,39 :)
Please, help in another problem, i wantr to can change language in your flash, then i add language with PPM maker then flash it to phone, then phone don't turn on.. say me how i can change languages in any flash file.. thanks

Sorry cant add more Language... coz it was HardModed it cant add more language coz it was removed to add more space in my flash. If your trying to edit it like add or modify the flash file.. it would corrupt the file which lead to "Contact Service" or the phone wont switch on.. If you like my flash and you like to creat your own Mod just do it your self, just visit my site for tutorial. You can patch some new features using nokix.. but sorry for now coz i dont have a nokix tutorial on my site.. but i have a plan for it, im bit busy with my study :)

But if you like my Flash just flash it with another phone and make sure to make a FUBU (FUll Back Up) of you phone.

Peace!

[Dai0]

Sorry cant add more Language... coz it was HardModed it cant add more language coz it was removed to add more space in my flash. If your trying to edit it like add or modify the flash file.. it would corrupt the file which lead to "Contact Service" or the phone wont switch on.. If you like my flash and you like to creat your own Mod just do it your self, just visit my site for tutorial. You can patch some new features using nokix.. but sorry for now coz i dont have a nokix tutorial on my site.. but i have a plan for it, im bit busy with my study :)

But if you like my Flash just flash it with another phone and make sure to make a FUBU (FUll Back Up) of you phone.

Peace!

OK :) thanks :) even i try to edit English language and english words rewrite in lithuanian? then i can do it?