help me with my w800 please :)

[braindamage15]

i recently bought some software and a cruiser cable for my phone here is the links 2 witch i bought them

cable
http://cgi.ebay.co.uk/Cruiser-fighter-unlocking-cable-unlock-K750i-W800i-W900_W0QQitemZ230015533509QQihZ013QQcategoryZ35208QQssPageNameZWD1VQQrdZ1QQcmdZViewItem#ebayphotohosting

software
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220011800275&ssPageName=MERCOSI_VI_ROSI_PR4_PCN_BIX&refitem=280015966561&itemcount=4&refwidgetloc=closed_view_item&refwidgettype=osi_widget


but when im trying 2 connect to my phone with them this is the eroor i get ???

Switch phone ON
ERROR: Phone not power up


but i dont get it because i am switching my phone on

does sum 1 know a better piece of software i can use please to unlock my sony ericsson w800 please

[bninho]

hello, do you pay for a free software? lol

look at this place and find a progrma to unlcok you phone for free with a usb cable ou with a dongle cable

www.schwantz-i.org :D

[unlock432]

Which program Unlocks W800's?

[braindamage15]

hello, do you pay for a free software? lol

look at this place and find a progrma to unlcok you phone for free with a usb cable ou with a dongle cable

www.schwantz-i.org :D


hi mate big thanx for the site but do you know the password for the files, as it says this

"These files are password protected... Pass is somewhrere on schwantz-i banner
"

and i can not work out what the pass is. please help

many thanx

[unlock432]

:lol:

I had the same problem when i first visited the site.

It's really not as hard as people find it to be. It really is in the Animated Banner.

Password Is:
i-ztnawhcs

Which is the Mirror of schwantz-i

Best of Luck.

[unlock432]

i recently bought some software and a cruiser cable for my phone here is the links 2 witch i bought them

...

Oh and going to the Main topic of this thread..

Try:

Charge your Battery to Maximum.
Turn Off Phone
Connect your S/E With PC and Configure your software to appropriate settings
Click "Do Selected Jobs"
When it says "phone power on" hold the On/off Button on your S/E W800

It should follow on and your phone will be unlocked.
Post Results.

I don't think there are any more advanced piece of S/E unlock Software other then the one on i-schwantz...
*the Smart v5*

Oh and next time, try not to be scammed into buying free software, And report this seller to Ebay. They should ban them.

Best Wishes.

[braindamage15]

Oh and going to the Main topic of this thread..

Try:

Charge your Battery to Maximum.
Turn Off Phone
Connect your S/E With PC and Configure your software to appropriate settings
Click "Do Selected Jobs"
When it says "phone power on" hold the On/off Button on your S/E W800

It should follow on and your phone will be unlocked.
Post Results.

I don't think there are any more advanced piece of S/E unlock Software other then the one on i-schwantz...
*the Smart v5*

Oh and next time, try not to be scammed into buying free software, And report this seller to Ebay. They should ban them.

Best Wishes.


hi m8 i really apriate u helping me out,

i got a problem i do what u say

but i get this error

Switch phone ON
ERROR: Phone not power up


please help

thanx

i had the cable but there was no cd/software with it do i ned software/drivers 4 the cable ??

many thanx

[unlock432]

Visit the site you purchased the cable from.

They should have the apropriate software for your phone and cable to download off the site.

When you connect your phone to your P.C do you get the Plug and Play sound??.

I'm pretty sure you should hear that as a signal that your phone has been recognised.

Firstly does you P.C find your Phone at all? Does it come with a little pop up from the system tray saying Found Hardware or something similar.
If not try installing the software that came with your phone, it'll help recognise the phone from the P.C and will most likly boost the power of the unlocking program.

[braindamage15]

Visit the site you purchased the cable from.

They should have the apropriate software for your phone and cable to download off the site.

When you connect your phone to your P.C do you get the Plug and Play sound??.

I'm pretty sure you should hear that as a signal that your phone has been recognised.

Firstly does you P.C find your Phone at all? Does it come with a little pop up from the system tray saying Found Hardware or something similar.
If not try installing the software that came with your phone, it'll help recognise the phone from the P.C and will most likly boost the power of the unlocking program.

sorry mate i am a noob at this,

i think my phone is recognised by the pc because u can see in the directory that the cable is recognised.(hope u know wat i mean)but it is installed 2wice ?? (see below)

Here is the cable that i got
http://netshop.kobonet.com/2in1_usb.php

here are sum screenshots of my pc

http://img506.imageshack.us/img506/434/untitlednq0.jpg
http://img427.imageshack.us/img427/4299/1qz5.jpg

[bninho]

hi mate big thanx for the site but do you know the password for the files, as it says this

"These files are password protected... Pass is somewhrere on schwantz-i banner
"

and i can not work out what the pass is. please help

many thanx

look at the banner boy.. type ztnawhcs-i :)

[unlock432]

Thanks..

Make sure your Settings are On COM15 where is say's COM PORT.
Make sure you do not get any errors when you select the PORT
(if it comes up with Error Dialog Box "Cannot Open Port" change USB to another port).

Change your Baudrate > Put the Rate Down.

USB cable settings are:
DSS-20/DSS-25

It says that your Cable is a serial converter...
Your Connection should work if you interface settings are set to
T-28 Serial Cable.

P.S Thanks for the Link and the Screen Shots.

[braindamage15]

Hi again mate i really apariatate all the help your giving me , i done what you said but got sum more errors :(

first error was when i tried reading all codes here is a screenshot
http://img389.imageshack.us/img389/3514/1zc7.jpg



we are getting closer lol, at least its finding my phone now

thanx again, but do u know what i am doing wrong

many thanx
braindamage






Thanks..

Make sure your Settings are On COM15 where is say's COM PORT.
Make sure you do not get any errors when you select the PORT
(if it comes up with Error Dialog Box "Cannot Open Port" change USB to another port).

Change your Baudrate > Put the Rate Down.

USB cable settings are:
DSS-20/DSS-25

It says that your Cable is a serial converter...
Your Connection should work if you interface settings are set to
T-28 Serial Cable.

P.S Thanks for the Link and the Screen Shots.

[unlock432]

Remove the screen shot of you changin your IMEI, it could get NokiaFree, You and ME into A LOT of trouble. Remove it now.

Sorry to freak you out, it's just very illegal.

I found that this error is caused by a bug in your version.
Surprisingly, there is a later version to the SEMC - tool.

Attached to this thread is v7.3 in 3 .rar files (use WinRAR to unzip them).

I tried using the program, but it says USB-SMART not Find (1)...
Something to do with the Port (i dont have the Cable pluged in)


Mayb u'll have better luck.
Anyway do what i said, use the T-28 interface and lowest baudrate.

I also heard that it is advisory that you remove all other USB cables while in the process of unlocking. This excludes your mouse
:lol:

Oh and if the 7.3 doesn't work..
I'm finding v6.6 (older but still has the bugs fixed)
and i'm also in the slow proccess of downloading v8.3 (which is going at .5 KB/s)

So, if it's unccessfully, by the next post, i should have it ready for you.

[braindamage15]

Hi mate, thanx again :) . i tried using the new version u uploaded for me but i get the same error as you get :(

so i tried again with version 5, and i got a diffrent error, see screenshot below

http://img518.imageshack.us/img518/6672/1ey8.jpg

i wil wait for the other versions you are getting and i hope they work :),

thanx again
braindamage

if you hav msn add me and we can chat on there :)

[email protected]






Remove the screen shot of you changin your IMEI, it could get NokiaFree, You and ME into A LOT of trouble. Remove it now.

Sorry to freak you out, it's just very illegal.

I found that this error is caused by a bug in your version.
Surprisingly, there is a later version to the SEMC - tool.

Attached to this thread is v7.3 in 3 .rar files (use WinRAR to unzip them).

I tried using the program, but it says USB-SMART not Find (1)...
Something to do with the Port (i dont have the Cable pluged in)


Mayb u'll have better luck.
Anyway do what i said, use the T-28 interface and lowest baudrate.

I also heard that it is advisory that you remove all other USB cables while in the process of unlocking. This excludes your mouse
:lol:

Oh and if the 7.3 doesn't work..
I'm finding v6.6 (older but still has the bugs fixed)
and i'm also in the slow proccess of downloading v8.3 (which is going at .5 KB/s)

So, if it's unccessfully, by the next post, i should have it ready for you.

[unlock432]

Hi,

Thanks for removing the picture.

Yeah, that error is due to the fact that your program is really Not Free...
I-phone packed it with bugs so that you'd have to buy the real working download.

You paid for the free one.. :sad:

Found This one v3.3, but it's cracked (not by me!) and it has a lot of swearing within the program, so rated MA15+.

Oh and you're email address will be removed by the Mods, so if you want to submit email's use the PM functions.

Do exacly what you've been doing before.
This time, i want you to extract all The Files into a folder.

Restart your PC.
Remove all other USB.
Turn off your phone, connect with PC. (make sure fully charged)
Config your settings like before.
Click "Do Cheap Sh!t Usb Job" :lol:
Turn on your phone.

Post Results. :-D

[braindamage15]

Hi,

Thanks for removing the picture.

Yeah, that error is due to the fact that your program is really Not Free...
I-phone packed it with bugs so that you'd have to buy the real working download.

You paid for the free one.. :sad:

Found This one v3.3, but it's cracked (not by me!) and it has a lot of swearing within the program, so rated MA15+.

Oh and you're email address will be removed by the Mods, so if you want to submit email's use the PM functions.

Do exacly what you've been doing before.
This time, i want you to extract all The Files into a folder.

Restart your PC.
Remove all other USB.
Turn off your phone, connect with PC. (make sure fully charged)
Config your settings like before.
Click "Do Cheap Sh!t Usb Job" :lol:
Turn on your phone.

Post Results. :-D


Hi m8, apraitate al the help, but stil no luck with this program, i wil post up a screenshot later when i am on my own PC.

is there other software \ versions that will do it , or no

[unlock432]

Hey Found this:

http://www.freefonesoftware.co.uk/software/sonics.zip

1. You will need a cruiser cable and Sonics Cracked (this software does models from k700i)

2. Open the software and hit the button Scan Port and under the device select the cruiser cable port (The usb-cable also has a com-port)

3. Hit the button Connect and it should show something like sonics ready

4. Hit the Button Unlock/Repair and when it shows power it on now and keep pressing power button (until it finishes)

5. After some time the process should finish and the phone will be Unlocked!

Please give it a go.

[braindamage15]

hi mate thanx again 4 the help, here is what i got , and thanx for your paitance, if u ad me on msn i wil have something nice 4 u ;)

http://i9.tinypic.com/3150c4i.jpg


but the phone i am trying 2 change the imei. du 2 cease of contract early and this software dont support that function does it ?

please reply, thanx :)