Flash File Spy For 3310 Into A 3330 It's Possible??how????help!!

[liam82]

I want to install the flashfile spymode for 3310 into a nokia 3330,how do i do?It's possible?
HELP!!
Thanx in advance!

[NokDoc]

Hi,

Off course. ;)

http://nokiafree.org/forums/t69049/s.html

U can take the pre-patched 4MB file in the link and patch the spymode script to it.

Or, u can take the 3310 spymode flash, and patch it 2MB > 4MB.

Or, U can take the 3310 spymode flash with Ur eeprom attached, and flash it twice, one time to 20.000, one time to 40.0000.

Good Luck.

NokDoc

[dvirus666]

Try a search. I did.

Try this. For the 3310 but basically the same.
http://nokiafree.org/forums/t81240/s.html

[liam82]

Or, u can take the 3310 spymode flash, and patch it 2MB > 4MB.

Or, U can take the 3310 spymode flash with Ur eeprom attached, and flash it twice, one time to 20.000, one time to 40.0000.



Hi NokDoc,thanx for the reply.

You're more expert than me in this field!!

So could i ask to you to be clearer??

1)If i take the 3310 spymode flash,how can i patch it 2MB > 4MB??I have Nokix........

2)Or if i take the 3310 spymode flash,how do i do to attach the eeprom to it??
The eeprom must be a wichever virgin eeprom of a 3310 or the eeprom of the 3310 that i must increase?

I would solve this problem for install the spymode flash into a 3330,and i thanx you for your help ok??

Best regards!!

[liam82]

[QUOTE=dvirus666;389619]Try a search. I did.

Try this. For the 3310 but basically the same.
http://nokiafree.org/forums/t81240/s.html[/QUOTE



Thanx Dvirus,but where is your script for the spymode flash 2.1.3??

There isn't in your website

Regards!

[dvirus666]

Thanx Dvirus,but where is your script for the spymode flash 2.1.3??
There isn't in your website

Not sure what one I used for the V2... It might have been the one mestrini done.

[NokDoc]

Hi,

Start with a clean Mcu/Ppm file, patch spymode and do the required recalcs on checksums stuff.

Then attach a 3310 (virgin) eeprom behind the mcu/ppm file, U could use the Dos command "copy /b Fullfile.Fls + Eprfile.Fls Combined.Fls" to combine all to a 2MB file.

Now flash that 2MB file twice into a 3330, one time to 20.0000 and then to 40.000, and set imei/faid etc.

U can also use the 4MB prepared 3310 file and run the spymode scripts on that, along with the recalcs etc.

Attach a 3310 (virgin) eeprom on that file and flash it only once, to 20.0000, set imei/faid etc.

The result will be the same as the 1st method, only on the 2nd file U have the extra 2MB free for own useage for eg new games or whatever U wanna add to it later.

NokDoc

[liam82]

[QUOTE=NokDoc;389654]Hi,

Start with a clean Mcu/Ppm file, patch spymode and do the required recalcs on checksums stuff.



Hi,

but if i download your demo (MCU and PPM files) it's ok?And how must i clean it?

For patch the spymode file how do i do?With Nokix?

After,how could i do for require recalcs on checksums stuff?From the address 003CFFFC?

[liam82]

Hi Doc,

i've an idea:

if you agree with me,i 'll send to you my flash file spy

and you modify it for me,so subsequently i'll flash it into a 3330.

I ask to you this because i need urgently of the flash file spymode

for a 3330,ok?Eventually i leave to you my email address where we

will be able to be put in contact --> [email protected].

I hope that you will be able to help me in this way.

Thanx in advance man!

Best regards!