PDA

View Full Version : File extensions for DCT4? -- MCU, PPM, CNT, PM



bobski
10-12-2006, 10:50 PM
Ive flashed MCU and PPM to a few WD2 phones like NGAGE. I come to do some DCT4 models and there are loads of different file extensions. Which file extension do i use for which flash area?. I need this information fairly quickly as I have a few 7250i's and 3100's to flash (english ppm).

Any help would be nice.

adampeake
17-12-2006, 05:40 PM
7250i is the NHL-4JX model.

Usually when flashing a UK handset with my Twister box I would use the following:

In MCU box select the file named nhl4jx05.410
In PPM box select the file named nhl4jx05.41c
In CNT box select the file named nhl4jx05.41.ucp_c

Then just press Flash.

These are obviously based on firmware version 05.41 but the files would still be the same for lower or higher firmware versions. The PPM file varies from country to country and service provider but I usually find the C version the best for UK use.

If you have used the erase function then you will need a PM file for the phone unless you had the forethough to save it!

Do the above, then load PM file then reset all UI functions.

Hope this helps

Adam