How to unlock LG-KG800 (Chocolate)

[HtheB]

Hi,

Does anybody knows how to unlock a LG KG800 (chocolate)? :(

I entered the code from the "normal" LG phones 2945#*5101# just to check the menu..

But there wasn't any place to put a NCK code :D :lol:

Is there a possebility to unlock the phone by using a calculator?

Or do I really need a cable?

(And... which program do I have to use? ^_^ )

[bcatlock]

cannot be done via codes,
can be done free,but this awkward,you have to modify,a usb cable end(female,)connect a serial cable to it,tx, rx, an gnd, as diagram show,then plug in your usb cable(that come with mob)into that,so ur mob plugged into usb cablethe us b end plugged into ur modded connector,and that to serial port,Start vygis1.43 (vygis 2g) use boundrate 115 200. select in list F2400 and press connect .You ill get message ''flash not supported yet''. start enforcer ,press enable, press ok to vygis message and then just press unlock allthow the unlock button is grey.
tried this,after about,1/2 hr it worked,much easier go shop an get it unlocked,anyway pic ere if you want 2 try.

[HtheB]

Thank you! :)

I'll give it a try ^^

[rhian]

Hi,

Does anybody knows how to unlock a LG KG800 (chocolate)? :(

I entered the code from the "normal" LG phones 2945#*5101# just to check the menu..

But there wasn't any place to put a NCK code :D :lol:

Is there a possebility to unlock the phone by using a calculator?

Or do I really need a cable?

(And... which program do I have to use? ^_^ )

hi once done all above switch phone off put in an unregistered sim and it asks for NCK code

this is a code im finding very hard find can u help:-P :-P

[rhian]

Instructions : on home screen type 2945#*#
eng mode menu should appear
go down to factory reset and select (dose take few min)
this resets phone to back befor was locked to a network
now insurt any other simcard on diffrent network and switch on
press unlock
then network
deactivate
THIS IS WERE IT ASKS FOR NCK CODE of which i dont have can you help plez

[rhian]

cannot be done via codes,
can be done free,but this awkward,you have to modify,a usb cable end(female,)connect a serial cable to it,tx, rx, an gnd, as diagram show,then plug in your usb cable(that come with mob)into that,so ur mob plugged into usb cablethe us b end plugged into ur modded connector,and that to serial port,Start vygis1.43 (vygis 2g) use boundrate 115 200. select in list F2400 and press connect .You ill get message ''flash not supported yet''. start enforcer ,press enable, press ok to vygis message and then just press unlock allthow the unlock button is grey.
tried this,after about,1/2 hr it worked,much easier go shop an get it unlocked,anyway pic ere if you want 2 try.

u really gone hard way around it can be done by codes as simpal as reseting the hand set then entering the nck code

do u by any chance have the nck code got rest sorted jst trying find that

[bcatlock]

the code way works but only on certain versions
as rhian mentions,
Instructions : on home screen type 2945#*#
eng mode menu should appear
go down to factory reset and select (dose take few min)
this resets phone to back befor was locked to a network

that is all i done to 2 kg800s they were unlocked

but all the others bout 25 the code not work,,i needed cable method,or the clip..
not bad though i suppose 1 in every 12 or so mobs can b don with the code...
if the mob resets,after code try ur sims.....

[darke]

Hi bcatlok the method to unlock the KG800 seems easy would you like to repost the picture of the scheme ?

Many thanks
:eek:

[Mr_xande]

I Can Unlock Your Phone For Free But You Need To Send Your Phone To Me
OR SEND ME A PM BUT ITS NOT FREE