3210 can't charge

[madmania]

i have 3210 that works fine, except the phone can't charge at all.
I did flash again, but still the problem exist.
I am think it should be hardware problem.
What I should do? or wich part should be replace to get phone charge.

ps: the battery is OK, the charger is ok, everything is fine. the problem is on the phone.

help me please

[WildSwan]

Try this test and procedure:

1. Turn your 3210 off.
2. plug in te charger. I assume it is plugged on the main electicity.
3. Check if the battery icon appears.
4. If it is blinking, you have a loose battery terminal contact on
your phone. Just resolder it, and user magnifying glass to see.

I hope this solves your problem.


Originally posted by madmania
i have 3210 that works fine, except the phone can't charge at all.
I did flash again, but still the problem exist.
I am think it should be hardware problem.
What I should do? or wich part should be replace to get phone charge.

ps: the battery is OK, the charger is ok, everything is fine. the problem is on the phone.

help me please

[madmania]

nope, the bat indicator doesn't appear... :mad:
but anyway thank's wildswan. do u have another solution?

[WildSwan]

Bring it to the service center because it may have bigger problems that we don't have a knowledge of. Have it diagnosed.


Originally posted by madmania
nope, the bat indicator doesn't appear... :mad:
but anyway thank's wildswan. do u have another solution?

[dr.bizar]

Hi the have u tried another charger ???

- In alot of the cases i've seen; the connector (the one to the phone) chews it's way through the cable, inside the connector - this resolves in either a shortcurcuit or a broken connection...

[Kilrah]

yes right and also the cable breaks at the point where it goes out of the charger.... mainly if you are used to wrapping the cable around it for transport ;)

Kilrah

[rizwan400]

:D :D :grin: :-D dear a fuse is locatied at the other side of charging connector tips means opposite side of pcb :D its color is white check it if it has no contact short its pins with a smaal piece of wire. u see its worked.i tried many times:)

[HANDYCRACKER2k2]

Hello!
Shows Your Phone "NOT CHARGING" or else?

or is just "nothing" on the display if you put on the charger??
i have also such a problem, i have to resolder a SMD-Resistor which is used for the BTEMP!!

[madmania]

thank's to all of you.
I will try what u suggest. and post the result as I finish the job
:D

[madmania]

sorry none of the hardware repair method really works for me :(
recently I have another 3210 that have same problem (can't charge) but the bat icon appear on the lcd when the charger connected.
I have try to change the charger IC, but it still same.
what I should do with this phone?? do I have to change the power supply IC ??