PDA

View Full Version : 3310 can be flashed, but can't be turned on



bisdak
04-11-2002, 12:03 PM
how could this be the case? i'm confused... tried flashing the fone but still cant turn on this moron...:mad: the phone was dropped considerably before this, and i also heated the power ic but still!!!

no power.

help me out guys,
bisdak:D

wesam
05-11-2002, 01:08 AM
hi
rehot ccont,cobba,hagar with good flux
please send result
wesam

bisdak
06-11-2002, 11:17 AM
still no power

smartcity88
06-11-2002, 02:59 PM
try to replace or rehot the user interface control ic or u test jump the ic to led work or not,if not change it!!

bongie
08-11-2002, 02:20 PM
try chaging the ccont. ive done it once.

badger
08-11-2002, 02:51 PM
What did you flash it with? I flashed a dodgy version of 5.59 and it wouldn't turn on, wouldn't re-flash either, said unrecognised flash I.D ffffff. I had to use the original Dejan and find 3310 flash loader files etc. It sorted it out.

john192
15-11-2002, 06:12 PM
How much current is the handset drawing

diGO
15-11-2002, 07:18 PM
I think it isn't the same, but time ago a 8210 let me flash it but no power. Problem was crystal clock. Good luck!

fone_a2002
15-11-2002, 08:05 PM
Hi ;
you maybe use wrong fls such as you may be use 3310 fls actually it must use 3315 or 3330. when you flash wrong fls mobile can't not open:) :)

nen77
17-11-2004, 06:00 PM
i have a 3310 ..i can flash-it.....when i put-it on twister...it works ok ..can be powered ...but power button circuit is broken....i replaced v202(diode)..ccont.. phone starts only i ...put..dumy baterry from twister..
sow i,m sure power button circuit is broken....i alredy took service manual but i can't find the circuit..sow if anybody can help