PDA

View Full Version : pls help me out regarding what schematic to use pls post it here



eastcoast
04-11-2002, 02:03 PM
please post here what schematic can i use if i want to use the software cardinal. i need schematics for me to read/write on the sim card

i had problems purchasing parts of the smart mouse reader which
they posted. what schem can i use instead???

Salami1_1
04-11-2002, 06:02 PM
Here is Dejan 1.33
It's also contains a schematic for reader/writer.

WBR

Salami1_1

eastcoast
05-11-2002, 02:55 AM
thanks Salami1_1

but would that dejan reader work for cardinal???
and can that give me the ability to clone sims???

eastcoast
05-11-2002, 09:15 AM
can anyone help me with the configuration of this ic.
coz i dont know how to number the pins of this ic?
can anyonr help me?
or can somebody put a link were i can find this ic's configuration??

the ic is this

74hc04

nase ck
05-11-2002, 09:33 AM
try check this link http://www.philipslogic.com/products/hc/pdf/74hc04.pdf maybe u can find some thing what u need...tq :)

eastcoast
05-11-2002, 01:32 PM
thanks

nase ck


im now i know which pins are for which

thanks again

big_bro
26-06-2005, 06:06 AM
can anyone help me with the configuration of this ic.
coz i dont know how to number the pins of this ic?
can anyonr help me?
or can somebody put a link were i can find this ic's configuration??

the ic is this

74hc04
Find the pinouts on this ic in microprocessor data handbook.

big_bro
28-06-2005, 05:47 PM
can anyone help me with the configuration of this ic.
coz i dont know how to number the pins of this ic?
can anyonr help me?
or can somebody put a link were i can find this ic's configuration??

the ic is this

74hc04
I am writing the pinouts of the ic in detail you will find the half circiled cut in one side of that ic put that side in left hand side and start counting from left side to right closer side first first pint is no 1 it is input of inverter gate one 3 input 4 output of second 5 input 6 out of third, no7 pin is ground{-Ve} no 14 is vcc{+ve} no 13 is input of fifth gate 12 is out put 11 input 10 output 9 input 8 output don,t forget no 14 is in next side of no 1 so no 14 is in left side then 13 .......8 is close to no 7 or you can start counting anticlock wise

I am just a electronic engineer don,t know more about sim cloning trying to learn it for myself so if anybody knows how to start please help me


thanks in advance

regards
big_bro