PDA

View Full Version : broken pins, 8850 hagar, help!



Deltaone
09-11-2002, 05:25 PM
I have aquired a Nokia 8850 which has the hagar missing as well as several of the socket pins and pads under them. Socket pins that are there still have the hager pins broken off in them. Any idea how to fix this mess?

john192
15-11-2002, 06:09 PM
Bin the phone its trashed

wfc
16-11-2002, 01:34 AM
do you want to sell it?
i need an 8850 cover in reasonable condition
:)

dio
16-11-2002, 06:54 PM
you must have a detail drawing for the 8850 board. which you can trace where does all the contact connect to.

for what i know some contact are of no use, so if the miss contact are the one that is of no use than you can just solder back a new hager.

if the miss contact is connected to some component, than you can try using conductive epoxy to fill the hole than solder back the hager(does not 100% work, need a bit of luck).

hope it helps

wesam
17-11-2002, 02:27 AM
hi
if the pin is connected to other component you know it and you have alot of time and your eyes is good then make a jumpers
from evry pin on the hagar to the bins on the board!!
sorry it's the only solution i think you can do
you need some good luck and after that you will need glases
wesam