3310 startup animation

[Da_Emperor]

how am i going to enable the draft startup animation (3310) or replace the whole frame (approx. 23 frame) with the new one such as the project Z flash.... i've tried change it using the ppm editor.. but when i flash it to the phone... the animation move very slow n stop after the 8th or 9th frame n didn't show the rest..:( :( :(

[DNewbies]

I'm having the same problem as well. After changing/edited 23 frames of the animated startup logo (default is the moving hand + draft human technology + a logo). But when i flashed back the edited flash, it only plays i think the 1st 6 or 8 frames which is the replacement for the moving hand and stop, it won't play anymore (replacement for draft human technology and replacement for the logo), is that means 331x only have 6 or 8 frames animated logo? how about the rest of 15 or 17 frames??i won't play?anyway to enable it?

TIA.

[Da_Emperor]

i've viewed the project z flash file using the ppm edit n it seems like they're replacing the whole frame from the moving hand to logo (its about 22 frame or more)
i've read something about viewing the flash on hexeditor n changing the startup animaton setting (number or sumthin like that).. but could't get the detail.. anyone knows how... feel free to let us know..:) :D :)

[catweasel]

Hi guys,

I have used all three startup animations as one 23 frame startup animation using FLSEdit it works 100%, mine is 3310 converted to 3315 v5.59.

I hope this helps, see attachment file.

For some reason I can't post the file at the moment, if you would like a copy please e-mail me.

Regards.

[benchnix]

@catweasel

Can u post some steps on how u change and manage the startup animation u said...
:)
thanx in advance..

[catweasel]

Hi Benchnix,

Open the flash you want to use in FLSEdit 0.3
> open animations
> scroll through to first startup logo
> increase length to 23
> scroll through frame No until a frame comes up that is not startup logo frame 7 (eg FAX)
> go to bitmap ID scroll down to find next startup logo's first frame 14D
> back to frame No - frame 8
> now to bitmap ID scroll again for following bitmap 14E & so on until you have all 23 frames click on OK and save your altered file.

(Please note this is with flash file 3310 5.59
mcu+ppm others will differ)

I hope you can follow this and it helps. Regards

[benchnix]

K. thanx catweasel !!
I will try it later..

[Da_Emperor]

Kewl m8...

whoa... kewl m8.. got to try this quickly..
anyway... thanx m8, u're great..

:cool: :cool: :cool:

[InkdieMode]

needed comct232.ocx for flashedit i dont have any kindly post here thnx...:(

[catweasel]

Hi InkdieMode,

Find attached the file you are seeking, I hope it is useful to you.

Regards.

[Da_Emperor]

hello m8....

nice work... i wonder how am i going to enable or edit those startup animation for 8210 or 8250. i couldn't enable it altough i did reset the startup logo using logomanager. it just show the "still" picture of both human hands... i've also trie to view it using PPMedit n couldn't find the logo m8.. is there any other way to handle it...??

thanx in advance m8.;) :D ;)

[catweasel]

Da_Emperor,

Hi mate I am doing most of my editing with FLSEdit by Joox now, it is simple to use & stable.

I don't know 8110 or 8250's very well but I think you could use other bitmaps that aren't used by your provider or if you are like me & don't play the games use "winner" bitmaps.

You will need to resize some but do persist with it as it is a good feeling when it all comes together.

use g3n0lite v1.6 to correct chks kill FAID kill MCU chks etc.

Good luck & best regards.

[theremoids]

hi! catweasel...

thanks for uploading the ocx... i've been trying to find that file since FLSEdit came out... thanks again!

[stallone1]

Originally posted by catweasel
Hi Benchnix,

Open the flash you want to use in FLSEdit 0.3
> open animations
> scroll through to first startup logo
> increase length to 23
> scroll through frame No until a frame comes up that is not startup logo frame 7 (eg FAX)
> go to bitmap ID scroll down to find next startup logo's first frame 14D
> back to frame No - frame 8
> now to bitmap ID scroll again for following bitmap 14E & so on until you have all 23 frames click on OK and save your altered file.

(Please note this is with flash file 3310 5.59
mcu+ppm others will differ)

I hope you can follow this and it helps. Regards


Is it possible for you to make a 23 frame and large pic for menu and post it here? with 5.59 H version?

[radicalgel]

is a data cable enough to use flsedit????

sorry im a newbie!!! help plz