PDA

View Full Version : How to upgrade 3330 into 3315?Sorry...



ryan_chong
19-11-2002, 12:04 PM
Hii all.....

Can someone tell me how to upgrade a 3330 into 3315?I flashed a 3315 Ver.5.57 but i get contact service.
I have upgraded 3310 into 3315 a lot but i never upgrade a 3330 before.What should i do?

Thanks in advance.....

LoboMau
19-11-2002, 02:34 PM
use this program...

cyclo
19-11-2002, 06:39 PM
Try flashing it with original 3310 firmware (mcu+ppm+eeprom) and than upgrade it in the same way you upgraded from the 3310.

slikmik
19-11-2002, 08:25 PM
ERM OK ALL IDEAS ABOVE ARE BOLLOX - Sorry :rolleyes:

To upgrade 3330 to 3315 you need to flash full 2megabyte flash of 3315 TWICE into the phone

firstly 200,000 then 400,000

All because the 3330 has wap and therefore takes up more room and has a 32megabit - (4 megabyte) flash ram :p
Mike

kid_rock
19-11-2002, 08:29 PM
3330 to 3315, u need a special flash file 4mb....

you can download here....

http://www.thony.xtr.at/dd69/flashfiles/modded/

Flash on rolis4.7xx (address 00200000 to 00600000)

hope this help!!!

slikmik
19-11-2002, 10:22 PM
Originally posted by kid_rock
3330 to 3315, u need a special flash file 4mb....

you can download here....

http://www.thony.xtr.at/dd69/flashfiles/modded/

Flash on rolis4.7xx (address 00200000 to 00600000)

hope this help!!!

Erm NEH NEH NEH NEH :rolleyes:

This 4mb flash is just two 3315's joined together so do what i said - simple

Mike

Nanda
19-11-2002, 11:12 PM
May I just add that changing a 3330 into 3315 isn't exactly an UPgrade... no matter what you may think of WAP!

Cheers,

theremoids
20-11-2002, 03:40 AM
...and flash your MODIFIED 3310/3315 flash file at 400000.

ryan_chong
20-11-2002, 05:24 AM
Wow....Thanks everybody for the infomations....I'll follow it.Hopefully it would help me....

Thanks again.....:)

ryan_chong
20-11-2002, 05:31 AM
Originally posted by LoboMau
use this program...

@LoBO

Hmm....Firstly i would like to thank u for ur help but what i need is to upgrade a 3330 into 3315.Maybe u r mistaken;)
Anyway,thanks a lot....

optimus777
20-11-2002, 06:11 AM
i had try this frist i read flash from 3315 fone but swith it for 3330 reading on rolis , then start....

after thet you got 4 MB flash software 3315 for 3330...
then flash it to your 3330 fone after that finish you got
3330 ==> 3315...
but with this way you will need a 3315 fone for reading to 4 MB




To upgrade 3330 to 3315 you need to flash full 2megabyte flash of 3315 TWICE into the phone


slimilk ways , i will try that,... later. thanks man.. ^_^

maybe with slimilk way , we do not need a 3315 fone ..

ryan_chong
20-11-2002, 06:16 AM
[QUOTE]Originally posted by optimus777
[B]i had try this frist i read flash from 3315 fone but swith it for 3330 reading on rolis , then start....

after thet you got 4 MB flash software 3315 for 3330...
then flash it to your 3330 fone after that finish you got
3330 ==> 3315...
but with this way you will need a 3315 fone for reading to 4 MB



Can i read a edited 3315 flash files?Or i need a origianl 3315 flash files?

Thanks.....

optimus777
20-11-2002, 07:10 AM
you can use both off them....or any flash off 3315
but after that you can't edit the flash again in this flash 3330 ==>3315... because the ppm manager detect it 3310 , then save it to 2 MB

and remember it use full flash.... MCU+PPM+EEPROM.... to do 3330 ==>3315...

ryan_chong
20-11-2002, 08:32 AM
Thanks a lot.....
I'll post the result soon.... :)
Thanks!

ryan_chong
20-11-2002, 02:29 PM
[QUOTE]Originally posted by optimus777
[B]i had try this frist i read flash from 3315 fone but swith it for 3330 reading on rolis , then start....

after thet you got 4 MB flash software 3315 for 3330...
then flash it to your 3330 fone after that finish you got
3330 ==> 3315...
but with this way you will need a 3315 fone for reading to 4 MB

@Optimus777

Yeah!!!!!I did it!I followed ur instructions and i have upgraded a 3330 into 3315!Thanks a million!:D

Thanks everyone for the informations!!

optimus777
20-11-2002, 04:33 PM
today i try again to edit the flash of 3330 ==> 3315...
and the ppm manager seem to be can edit the flash ..but the 3330 fone , don't have with me to try it because it was belonging to my brother in law of mine and he is not with me right now

a month ago i try to edit with PPM edit and got contact servis....

tell me if you can edit the flash with succesfull, ok..:p .. i like to know more about this things..

can you try the slimik way ???:cool:

ryan_chong
21-11-2002, 07:37 AM
@Optimus 777

Yesterday i flashed a 3315(edited) fls files into 3330 and it's fine.
I have edited the 3315 fls with PPMedit,so i think u can edit any 3315 fls by PPMedit that u wan to flash into ur 3330.Dun forget to checksum after editing.

Hmm...now i dun have 3330 to try silkmilk way to upgrade 3330 into 3315.But i'll let u know when i try it.

Thanks again.....:)

optimus777
21-11-2002, 01:28 PM
Yesterday i flashed a 3315(edited) fls files into 3330 and it's fine.

no, what i ment is after you have 3330 with the flash 3315.. you can't edit the fone again... maybe the addres is mess up.. not
2000000- 55000000 (MCU+PPM)....so always got contact servis..



:p :p :p

johnrebua
21-11-2002, 01:48 PM
my friend can upgrade the 3330 to 3315 i mean downgade have auto keypad lock but no wap and animation screen saver. you need to full flash the file image... try itgood luck...........