Yasser
26-02-2002, 06:04 AM
Hi Guys!!!
How are you? Well, I have finally made a cable (Modified mbus for Rolis 5.14 by Abe) and it worked 100% with my 3310.
This 3310 had a wrong IMEI and 4 locks. My friend flashed it with some next mans full backup. Silly guy!!
So, This what I did.
1). Flashed the phone with 3310 v5.03 PPM F by using Rolis 4.77.
2). Used nk_calc and pressed F1 to calc FAID......eeprom updated. /n/images/smiles/icon_smile.gif
3). Pressed F2 to CHANGE the IMEI number to correct IMEI....DONe..no problem.
4). Pressed F3 for full factory settings in eeprom....done....no problems.
5). Used my dual mbus/fbus and read locks status in NokiaTool035. All 4 locks CLOSE.
6). Took phone OFF from cable...and left it for 5 secs and then read i again......somehow...all locks now shows OPEN ......a bit wierd...but the job done.
Its now working on all networks and the correct IMEI on it. However, the original IMEI is still showing in nokiatool as the older one.....I cant change it for some reason...any ideas??
I used my cable on COM 2 with windows 98.....(normal edition....not SE)
and thats it....
Everything is working 100%....APART from that if i use nokiatool, i can still read the original IMEI as the older wrong one.....hence. IMEI MISMATCH...as the nokia centre ppl call it...heheheh
Anyway, I hope it helps in some ways.
Take Care
BR
Yasser /n/images/smiles/icon_smile.gif
How are you? Well, I have finally made a cable (Modified mbus for Rolis 5.14 by Abe) and it worked 100% with my 3310.
This 3310 had a wrong IMEI and 4 locks. My friend flashed it with some next mans full backup. Silly guy!!
So, This what I did.
1). Flashed the phone with 3310 v5.03 PPM F by using Rolis 4.77.
2). Used nk_calc and pressed F1 to calc FAID......eeprom updated. /n/images/smiles/icon_smile.gif
3). Pressed F2 to CHANGE the IMEI number to correct IMEI....DONe..no problem.
4). Pressed F3 for full factory settings in eeprom....done....no problems.
5). Used my dual mbus/fbus and read locks status in NokiaTool035. All 4 locks CLOSE.
6). Took phone OFF from cable...and left it for 5 secs and then read i again......somehow...all locks now shows OPEN ......a bit wierd...but the job done.
Its now working on all networks and the correct IMEI on it. However, the original IMEI is still showing in nokiatool as the older one.....I cant change it for some reason...any ideas??
I used my cable on COM 2 with windows 98.....(normal edition....not SE)
and thats it....
Everything is working 100%....APART from that if i use nokiatool, i can still read the original IMEI as the older wrong one.....hence. IMEI MISMATCH...as the nokia centre ppl call it...heheheh
Anyway, I hope it helps in some ways.
Take Care
BR
Yasser /n/images/smiles/icon_smile.gif