contact service on 6210 how can i fix

[dragon100]

can some one please guide me through this???

[theremoids]

flash a 6210 mcu+ppm+virgin eeprom... put your IMEI, reset sp locks and set faid.

[dragon100]

can u please post a step by step guide to what i need to flash the phone??

thanks

[theremoids]

you need a 6210 mcu, ppm & virgin eeprom files... join them together and flash it to your 6210 using a flasher cable using a dct3 flasher software like rolis 4.78... after that use your MBUS cable and put the fone's IMEI, unlock all 4 locks and set faid using a nokia tool like knok or rolis nokia 1.7... off/on fone... that's it.

[dragon100]

is there any way some one has the mcu, ppm & virgin eeprom files all joined together???

cheers

[LoboMau]

You don't need to flash the files at the same time.

Flash the MCU+PPM then flash vrigin eeprom.
By the way, what language do you want?
I can post the file here.

[LoboMau]

Here's the virgin eeprom...
Tell me the language you want.
I'l post it here.

[fox_q5]

Originally posted by dragon100
can some one please guide me through this???


to dragon100,
wat reason of contact service in you nokia 6210?
maybe its software repair or hardware repair.
but the advice of theremoids and luboMau is rigth in software repair,
for me check the reason of contact service

[dragon100]

okay i have never flashed before so can so one tell me what you mean by flash the mcu???

also its in english

[LoboMau]

Fisrt thing you need to have: a flasher cable and a mbus cable.
After you get those cables, you need to get two programs: rollis 4.78, and nokia tool 1.8 by rollis.
then you need to download the files i'm posting on the next message.
connect the flasher cable to the lpt1 port(your printer port)
then open rollis 4.78(whit your phone off), choose your mobile type(6210), and press load MCU. choose the file 6210MCU. then click load PPM.choose the file 6210PPM. follow the instructions of the program.
after the message flash write complete appears, flash it again, but this time open the file that i've posted in my previous message(6210 virgin eeprom). after all those steps, disconnect your flasher cable, and conect your mbus cable to one of your COM ports. turn your phone on. When you turn your phone on the contact service message should have disapeared already, if not repeat all steps above. try a couple of times. if the contact service still appears it's not a software problem but an hardware problem. if your phone does not show the contact service message open nokia tool 1.8 by rollis. insert your IMEI (back of the phone under your battery. the big number in there is your IMEI) click set faid, click unlock SP locks. After that off/on your phone and the phone should be ok.:)

[LoboMau]

I'l post it in next message

[dragon100]

thanks for all your help so far mate can u please post the two other files, thanks

[LoboMau]

Sorry about this.

I don't know what's happenig, i can't post anything...:confused:

Give me your email(it must have 2,2 Mb free space).

[dragon100]

sorry can some one please tell me above when he says open virgin eprom file which button do i press in Rolis Flasher is it the Load MCU or the Load PPM???

I need the MCU and PPM for English if some one can send it to me


also what relevence does start and end address have???


Thanks

[email protected] is email add

[dragon100]

hi i have flashed the mcu and ppm sucessfully but one problem when i click on write then try to open the virgin epromm file it gives me an error File Size must be n*64KB (n=1,2,3..)

can some one post a good virgin epromm file or how to flash it to the phone if the above on is correct

Thanks

[2tz]

ive just repaired a CS 6210...
try looking for the eepromm+pmm (its usually 384? Kbytes)
http://kickme.to/dd69, i think i found it here.

but first, try to determine where in your flash (i.e. mcu, ppm, eeprom) is the problem, use eeprom tools 3.1 and click "test". somehow, it will show where the problem lies, though im not quite sure this is fool-proof.

if its in the eepromm, go to the url i posted and look for the virgin eepromm+pmm, its got a readme file so you'll know what to do after flashing the phone.
PLEASE try other means first, im not quite sure if this will work out on your phone. Best regards.

2tz:)

[dragon100]

anyone please

[dragon100]

anyone???