New PC

[Andrew_Emil]

i have a brand new AMD Duron 1.2 GHz PC and i used Nokia Flash Tool, Phoenix and Wintesla ...it wont work with my Pc...i had my cables checked but it worked fine with other PCs..what did i miss? any step by step guide on how to set up my Pc to work with flash softwares?

[Damian]

im guessing you are using XP........

[hooi76]

is it working now?

[Andrew_Emil]

my brand pc still doesnt work with any flashing tools..it works fine with logomanager and noktool ...guys i need your help on this...i have no idea.thanks

im using win 98 OS

[hooi76]

I'm using a P4 1.6g, works fine for me.

[lee1225]

i am having same problems usings win 98 can't get any flashing s/w to work at all.

Can some one help????????, Please help us !!!!!!!!


Thanks in advance guys.;)

[butchsor]

Could you post the errors here? My Duron dual booty 98 & XP have no problems on flashing.

[tempe]

Originally posted by lee1225
i am having same problems usings win 98 can't get any flashing s/w to work at all.

Can some one help????????, Please help us !!!!!!!!


Thanks in advance guys.;)

It is good if you can be more specific on what kind of error. Unable to run the program? or the program could not communicate with the phone. If the program could not communicate with the phone, few things you can check:

1. Change LPT mode to EPP or ECP
2. Check your cable connection (I guess this is not the problem)
3. If you built your own cable, please make sure you use HC family instead of others. HC family has Smitt Trigger function...

I have experience where my flasher cable only works on PC, which slower than 300MHz, but not on the faster PC. This was due to the chip I used was LS14. When I changed to HC14, the flasher programs works fine on my new PC...

If you use notebook, there will be a problem, please search for notebook in this forum...

[Andrew_Emil]

i have tried changing EPP-ECP...what other possible factors that would cause this problem? i tested the cable with my friend's AMD duron 1ghz and it worked fine..


please help me with my problem? could it be my programs are corrupted?:( :(

[Manipulator]

im' not sure about this ,but maybe your printer port is locked by some other program,or your printer port is not working.
do you ever use your LPT port with printer.

[tempe]

Originally posted by Manipulator
im' not sure about this ,but maybe your printer port is locked by some other program,or your printer port is not working.
do you ever use your LPT port with printer.

I have the same thought...

[Andrew_Emil]

it works with my HP printer...could u guys tell me where to download flashing programs that works fine with your PC...ill try it with mine.

i checked my cables and the chips are LS14 and HC14 ...both of them wont work.

whats wrong ? could you guys help me in finding a solution to my problem

[Manipulator]

maybe you printer port can not provide enough votlage to power up the flash cable.try to get a external power supply(4.5V - 5V).to power up your cable.
can you write out the error message you get when you connect you cable to lpt port and phone(make sure you phone is off).and run rolis v4.78.

[demon_head]

Where should the exter power supply be connected?

Could you send the diagram on where to connect the external power supply on the flasher cable?

my email add: [email protected]

[Andrew_Emil]

i installed win98 in my PC im going to change it to win98 second edition hope this would solve the problem.

[tamz3315]

did you check the Input output range?

[tamz3315]

Check your LPT Input/Output Range in your LPT port using Lpt 1 in Rolis flasher it must be 0378-037F

or try to use knok flasher there is a 3 lpt port choices there, trial and error....

Hope it may solve the problem...

[Andrew_Emil]

thanks for the tip tamz...do u use nokia flash tool by cyberdog ?

[ma1362]

nope. i use rolis and knok i flash a lot of 3310 converted to 3315 and make money with it. but i destroy my 5110 eeprom :)

[tamz3315]

sorry ma1362 di ka kasi nag logout e kaya nagamit ko profile mo.

[Damian]

this is an english forum so please use english.......

[Andrew_Emil]

Originally posted by ma1362
nope. i use rolis and knok i flash a lot of 3310 converted to 3315 and make money with it. but i destroy my 5110 eeprom :)

pre could give some info or step by step guide on how to use flash tools to convert nokia fones to higher versions...i still have to solve my new PC problem yet:( i checked i/o range of my LPT1 it was set at 0378-037F..:(

[Manipulator]

@Andrew_Emil

did you try to power you cable with external power.
connect a 4.5v-5v voltage to the 74HC14 chip. +ve to pin 14 and -ve to pin7.

[Andrew_Emil]

ill try powering my flash cable...it wont damage my PC right?

[Manipulator]

Originally posted by Andrew_Emil
ill try powering my flash cable...it wont damage my PC right?

it will not damage your pc with the original circuit + the power supply but make sure it is 4.5v to 5v.not more than that,it will destory your chip.

[Andrew_Emil]

Tx phone not responding this is the error i get

[tempe]

From where you installed your printer driver? Win98 CD or separate disk come together with the printer?

[Manipulator]

Originally posted by Andrew_Emil
Tx phone not responding this is the error i get

do you add the external power supply as i told you.
maybe your chip has problem.but as you say,it work with other pc,than you should check your LPT port.