****PCB FOR Terminator****

**nonu_don** · 19-03-2003 04:33 AM

Hi, is somebody having a PCB design for making the terminator dongle. if yes then please share it with me

Single layered PCB is appriciated.

Naman
nonu_don@yahoo.co.uk

**nonu_don** · 19-03-2003 05:14 AM

hi, i got one from gsmhack-crew, it is single layered but the prob with this design is that it does not uses db25 at both sides. just uses simple wires solded to pcb to connect pc and phone. please get me some better one which have some universal sockets.

Naman
attaching the pcb

**Wu-Tao** · 19-03-2003 07:26 PM

Hi, but this pcb not have DC 5v, and where is the .hex for pic???

Thanks, and sorry for my englis

**nonu_don** · 20-03-2003 02:29 AM

the terminator dongle get +5 from the phone connector ( pin 9 and 22). see sony-eric-cable.pdf for more details.

Naman

**Wu-Tao** · 20-03-2003 12:18 PM

Thanks but where is the .hex working 100% for the pic 16F876-20/SP????

Best regards.

**nonu_don** · 20-03-2003 12:43 PM

Originally posted by Wu-Tao
Thanks but where is the .hex working 100% for the pic 16F876-20/SP????

Best regards.

i have 2 type of hex for this, but none tested by me.
attaching

Naman

Ps. try searching old posts before asking...

**zlavo** · 21-03-2003 07:56 AM

This two files is the same, but what must be other settings: fusses,code protect, ID. I know that oscilator setting must be "HS" for this quartz. I think ID is important. I made this dohgle,
but soft reply "dongle not find". Any help?

**DaveGSM82** · 22-03-2003 01:34 PM

can anyone say whether this thing actualy works?

I have two T68's that I need to unlock and I need I need to know before I build one.

Dave.

**nonu_don** · 22-03-2003 06:12 PM

just got my terminator dongle ready,,, and yes it works,...
well i have not unlocked a phone yet but, donge is detected.

Naman

**Wu-Tao** · 22-03-2003 08:27 PM

You can explain with what files have planned it how have configured the programmer???

Thanks.

**nonu_don** · 23-03-2003 03:01 AM

i am attching the hex as well as the pcb which i used to build the dongle.

Naman
dont distub the default config of this hex file in icprog, just load the file and press program all.

**bossgrp** · 23-03-2003 10:52 AM

sim card use for what function and what 's bin,hex file to program sim card

**zlavo** · 24-03-2003 09:16 AM

I think it is not free in this moment:
mad:

**Alinus** · 24-03-2003 02:35 PM

u can bet that's not for free....

**Wu-Tao** · 08-04-2003 04:38 PM

This scheme not working, the message with terminator 1.3, 1.6 & 1.8 is: dongle not find

**nonu_don** · 08-04-2003 05:32 PM

sorry dude, pcb working,,, as far as my dongle is detected with same pcb.

used this attached hex only

with others dongle n/a.

Naman
please post ur reply,,, did it worked for u???

**Wu-Tao** · 08-04-2003 08:01 PM

With what software recognizes it you? ??, because I have done two times the pcb and I have reviewed it carefully, but continues without functioning. Certainly the hex that utilize is that.

**stavygsm** · 08-04-2003 09:11 PM

It working 100% for programming 16F876_20 .I test it and work

**Wu-Tao** · 09-04-2003 07:54 AM

Je, jejejeje, did not mean that had problems to plan the pic, the soft that ask is the terminator, the version with the one that recognizes the dongle.

Thanks.

**nonu_don** · 09-04-2003 09:36 AM

mine works with every version,, ie term 1.1, 1.2, 1.3, 1.6, 1.8, 2.0, Cooler 1.0

Naman

**Wu-Tao** · 10-04-2003 07:19 PM

A doubt, is necessary to put the smartcard? ???, because it do not I have position, perhaps be therefore for which does not function? ???

**nonu_don** · 11-04-2003 02:45 AM

no u dont have to place the smartcard for making a terminator dongle. It is required when u r making a DIC dongle. You dont even need the 74HC74 for terminator. it is also for DIV...

NAman

**Wu-Tao** · 11-04-2003 01:23 PM

Then the 74HC74 does not do lack for the dongle terminator? ???, not one must puncture it? ??? or what..

**fhwong** · 20-04-2003 05:23 PM

My Dongle ERROR: 0101

**davie** · 02-11-2003 07:57 PM

Hi!

stavygsm' s icprog.zip have virus win95 Dupator!!!!!!!!!!!!!!!!!!!!!

Regards.

**pm03** · 09-11-2003 12:37 AM

hi,
here is worked sheme and pcb

**the-equinoxe** · 07-01-2004 04:23 PM

Here is the asembly file for the terminator dongle
(decompiled from original dongle!)

**cam_id** · 28-01-2004 08:50 AM

!!!!!!!!!!!!!!WARNING!!!!!!!!!!!!!!

stavygsm
YOUR file icprog.zip HAS w32/dupator virus

**Pejo** · 30-01-2004 10:13 PM

Try here:

Terminator

**rumensat** · 05-12-2004 10:00 AM

please can somebody post here HEX file for dct4 dongle with PIC16f876?

Unlock Iphone by IMEI - Unlock Samsung by IMEI - Unlock Nokia by IMEI - Unlock Blackberry by IMEI

Thread: PCB FOR Terminator

LinkBack

Thread Tools

Rate This Thread

Display