If anybody has 3310-503 repair.fls or some methode to repair the broken flash of a 3310-503.This one it's reset at every 10 seconds.I have the original e2prom bin(003D0000-00400000) if this can help.
Please help me.
Thank you,
Dragos
Printable View
If anybody has 3310-503 repair.fls or some methode to repair the broken flash of a 3310-503.This one it's reset at every 10 seconds.I have the original e2prom bin(003D0000-00400000) if this can help.
Please help me.
Thank you,
Dragos
you maybe flashed it with another ppm pack version......?thats why it resets......
you have to know which ppm pack had your phone before flashing.......
or maybe you flashed a full flash with eeprom 200-400....first try to restore you eeprom from 3D0-400 but check the file in hex or wordpad that has not all 00 FF 00 FF.........
Thank you, Abe,for answer me so fast!
Yes,I flashed it with another ppm pack version ,'cause the phone was dead,so i didn.t know what ppm pack version was the original one . I tried to flash it only with mcu pack, but it didn't work and after I flashed it with ppm pack, the phone turned on. All I know now is that his actual version of ppm pack is D, because this is the only one I've got for 3310-503.
If you have another version so I can try and find by chance the original version,please help me.The phone had romanian language and by my knowledge the ppm pack E has this language.See the attachemenmt!
Hope to hear from you soon!
Hi Dragos!!!
First do what Abe has told you to do. I hope that should fix your phone. If you had flashed this phone from an older version, then you would have to calculate FAID.
But, if you already had 5.03 and just want to restore than I am attaching MCU_v503_PPM_E.zip. This is a complete. You MUST have the orginal backup from the previous version EEPROM.
Remember, MCU end addresses and PPM Start address are DIFFERENt in some version of 3310.
The file I am sending you will only work if you had 5.03 with PPM E before you tried to change to different PPM.
I hope this helps.
BR
Yasser