Printable View
phone not allows to do any operation with phonebook
with simcard book works ok
i tried to reflash and reset phone but no success
whot can i do?
i tried to write virgin eeprom(i have 24k eeprom) but Rolis works only k*64k eeproms
any other prog not writes it
need help
Thanx
br
Try to find another eeprom and upgrade the phones current software!
By the way what do you mean the phone wont let you access the phone bk?
Is it that the screen goes blank when you try to access it and other large menu's?
i get something like no access (i dont remember exactly) when i try to list numbers or edit or clear
btw can you send me working eeprom for Rolis?
Yes mate here are several different eeproms, two for the 6210 and one for the 6250!
Make sure you write the eeprom to the address stated at the end of each file name!
The no access problem is normally solved by a full factory reset, I remember that problem in an 8310 I had brought to me! full reset and it worked fine!
thanx for eeproms
but i cant write them by Rolis because it asks for n*64k eeprom size and other progs dont works for me with this phone
advice?
What cable are you using?
To write an eeprom you need a flasher cable which connects to the printer port of your PC!
ofcourse
i used this cable long time
When you tell it to write the flash image (eeprom) type in the address of the file into the where to write box! it will then write the eeprom onto the phone and it should be fine!
What you need to do is use a datacable and use nokia tool by rollis to do a factory reset (SFR)
I am also facing this same problem, how did u solve it svh
@svh
Try this eeprom, flash it to ur phone start address 5A then quickset faid, reset sp locks and restore factory settings. Hope it works....
i know this might sound silly, but have you actually selected phone and sim memory from the phonebook options, because on that phone you have 3 options i think
PHONE AND SIM MEMORY
SIM MEMORY
PHONE MEMORY
i think you must select the phone and sim memory
to get to this option i think you press NAMES---->SETTINGS/OPTIONS----->MEMORY IN USE,
hope this helps