Printable View
I know the memory map for the flash files, for example 7110 => MCU 00200000-00510000 PPM 00510000-00590000 EEPROM+PMM 00590000-00600000.
BUT
The phone has a 16Mb memory so what is this used for?
What and where is written and what shouldn't be erased???
Thanks in advance!
Hi,
16Mb = 16 Mbit
16Mbit = 2 MB, 2 MByte
No other data..
Ps, I think a 7110 has 4MB.
NokDoc
The 7110 has two 16 Mb flash chips so it shows up as 16 even though there is 32!
Thank you for your reply!
I made a mistake, so it has a 16MByte chip shown when flashing, and only address 0x200000 to 0x600000 is written with flash.
0x000000 to 0x200000 is for what? = 2MBytes
0x600000 to 0xFFFFFF is for what? = 10MBytes
Nobody knows anything about these regions?
Past 0x600000 is nothing as there is no memory past that!
If you write there it will write at 0x200000!
Up to 0x200000 I have no idea try reading off there and compare the code you get with the flash file on there!
Hi,
20.0000 upto 60.0000 = 4MByte, = 32 Mbit.
U only have 4 MB, there is NO more...
regards
Can somebody help ? i need the all the memory map,MCUm,,EEPROM...for 8310 and 6110...Thanks