fls2 cable

H! guys,
Have you already tried using fls2 cable?
Well, try to build one cause i build one myself and it works 100% with:
-Dejan flasher 1.00b
-Nk_calc
-Rolis4.77
-Rolis5.15b
-Nokiatool034/035
-logomanager
-Dark Lemming
You don't have to pull-out or change cable,it is all in one.
Some changes on components value.
diodes are change to 1N4148,C1 and C2 =47uF/10v, C3,C4,C5 and C6 =10uF/10v
U3-78L05
Connection on DB9 pin.
RTS->PIN4
DTR->PIN7
RX->PIN2
TX->PIN3
GND->PIN5
connect U1 PIN20 to VCC and PIN10 to GND

Thats it! Enjoy!
j_h_u_n

Hi

Thanks for that information. Do u have the schematic for this cable? Please attach

Thanks

BR

Yasser

Hi! Yasser,
Sorry i forgot to.
attached is the pdf file of FLS2,only changes to work is to connect pin19 of U1 to pin17 of DB25 and pin1 of U1 to pin14 of DB25.Then download the software(devman) from b-phreaks site.If you can download the scheme on b-phreaks and try to compare.I already try this device on 5110,6150,3210,3310,8250.I think this device could a great help from those who have problems on cables.

If you have problem with it,you can mail me.

j_h_u_n

Hi Jhun


Thanks for the file. So, we can now use LPT and COM ports by using one cable??

What is J5 for?? to go to COM port?

Why did u make those modifications??

Thanks

BR

Yasser

Hi! Yasser,
Do you mean J3 from the scheme?Cause there's no J5 there.
First i try to do the scheme on b-pheaks site,it only work with flasher mode and then when i found the other one that came from other site,works only with MBUS mode.When i try to adopt the scheme on b-pheaks site using the values of component on the other scheme both FLASH and MBUS mode works perfectly.
I hope you get me.
Did you already try to do it?

Regards
j_h_u_n

Hi Jhun

Thanks so much for this info....

very helpful...can u please put all the instructions of the modifications and other files again in one zip file.......Thanks.

I have cables already but I will make it when i get a chance.......

once again...great help

Take care

BR

Yasser

is the cable fls-2 also good for flashing in wintesla??

hi
that scheme has been on b-phreaks site for a while now...

there are some other home made designs floating in the net, without the b-phreaks software control.
one i remember had a switch controling m bus line, and fly lead from com to lpt port (switch on m bus line to select com or lpt).


@REYESITO
no you will be able to use m bus function as normal but flashing still requires pkd1 and fls-something security box (not really to good at remembering stuff like that :))