Results 1 to 9 of 9

Thread: Partial Flashes

  1. #1
    Can Anyone here post a brief note about making partial flashes and what i need to make them??? I have been looking for good american partials for about a week and cannot locate any for the 51xx/61xx models.
    I have access to 1000's of cellular phones to make the partials from.

    I also have alot of american software to trade.


    I would be willing to trade or puchase them.

  2. #2
    Partial flashes for unlocking only needed on phones pre January 20000 earlier phones can be unlocked with Nokia tool and Mbus data lead on com port.
    The 6110 versions all can be unlocked with the above method as can the 5110 phones pre v 4.59.
    Please read information at the two links given below and any other information from this site about flashing before you attempt to write to any phones.
    Flash in hast and repent in leisure.
    I have included a list of adresses so you can make full backups of your phones.

    http://gsmsearch.com/nfree/nfreeboard/read.php?f=1&i=1763&t=1763
    http://gsmsearch.com/faq/nokiaflasher.html

    3210 (all versions):
    mcu: 00200000 - 002F0000
    ppm: 002F0000 - 00400000
    eeprom + pmm: n/a

    3310 (v3.24 and v4.02):
    mcu: 00200000 - 00320000
    ppm: 00320000 - 003D0000
    eeprom + pmm: 003D0000 - 00400000

    3310 ( v4.06+ ):
    mcu: 00200000 - 00330000
    ppm: 00330000 - 003D0000
    eeprom + pmm: 003D0000 - 00400000

    3330 (all versions?):
    mcu: 00200000 - 00490000
    ppm: 00490000 - 00550000
    eeprom + pmm: 00550000 - 00600000

    5110 (all versions):
    mcu: 00200000 - 002B0000
    ppm: 002B0000 - 00300000
    eeprom + pmm: n/a

    5130 (all versions):
    mcu: 00200000 - 002C0000
    ppm: 002C0000 - 00300000
    eeprom + pmm: n/a

    6110 (all versions):
    mcu: 00200000 - 002C0000
    ppm: 002C0000 - 00300000
    eeprom + pmm: n/a

    6150 (all versions):
    mcu: 00200000 - 00360000
    ppm: 00360000 - 00400000
    eeprom + pmm: n/a

    6210 (all versions):
    mcu: 00200000 - 00520000
    ppm: 00520000 - 005A0000
    eeprom + pmm: 005A0000 - 00600000

    7110 (all versions):
    mcu: 00200000 - 00510000
    ppm: 00510000 - 00590000
    eeprom + pmm: 00590000 - 00600000

    8210 (all versions):
    mcu: 00200000 - 00340000
    ppm: 00340000 - 003D0000
    eeprom + pmm: 003D0000 - 00400000

    8250(see 8210?)

    8290 (all versions):
    see 8210

    8850 (all versions):
    look at 8210

  3. #3
    Thanks for the info! where would i go to learn how to "make" partials? for example

    I have a nokia 5190 VER 6.11 that is unlocked and i want to make a partial from it so i can unlock others.

    I have tried a few partials on the web for this version but none of them work!


    Thanks in advance!

  4. #4

  5. #5
    So if i am understanding correctly... all i need to do is read the specific range from an unlocked phone and then load that into a locked phone and this should work?

    if this is true i am doing it correctly and i just dont have the corrrect range...Weird! because i have tried a VERY broad range of the flash. anyone?????? any ideas?

    If someone can shed some light i would be more than happy to post the files if i can get them to work!

  6. #6
    I tried to run a partial flash on my nokia3310 and now it doesnt power up anymore in my infinite wisdom i didnt keep a copy of the original file to restore the phone is there any way to repair it or is the phone now junki would be grateful for any help

  7. #7
    Well if i kneew for sure how to make them i would make one for you to try! I hope someone responds that knows for sure!

  8. #8
    HIya all,

    I bought some Flasher cables yesterday. plugged it in at the back of my "PC" in the printer port and then loaded up Nokia Tool. after connecting the flasher cable to my 6210 i clicked on Read ME, and after about 6-7 secs it sed "Phone not connected"

    Can anyone plz tell why it is doing this .

    thanx very much.

  9. #9
    HIya all,

    I bought some Flasher cables yesterday. plugged it in at the back of my "PC" in the printer port and then loaded up Nokia Tool. after connecting the flasher cable to my 6210 i clicked on Read ME, and after about 6-7 secs it sed "Phone not connected"

    Can anyone plz tell why it is doing this .

    thanx very much.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •