3310 'Contact Service'

[ozpacific]

The current s/w ver 04.45, i flashed to ver 05.87
After flashed, it came out saying CONTACT SERVICE.
So what's the problem, as unable to faid it.
Which version is best ??

[sergo_zmeia]

Hi!
Flash it again than switch the flasher cable with F/Mbus cable
update fade and SP locks and reset full factory settings...
Hope that helps...
Good luck!
Regards!
Sergo_Zmeia

[fox_q5]

maybe the software you send the phone
is corrupted,try to flash another software version


HOPE THIS HELP.

[matt_016]

@ ozpacific.....

U forgot 2 fix/correct MCU&PPM checksums.....I've encountered this prob ONCE when I first starting 2 flash my fone.....

Try 2 make a search around this forum....4 SURE U'LL FIND A SOLUTION!!!

But, here's some tips from me (I do this on my fone..and FIXED it)

Just search 4 a FULL FLASH (MCU+PPM+EEPROM) v5.XX about 2MB
Then just flash it 2 your fone....
Done!!!

Hope helps!!

[Nokiacrazi]

Or just reflash using your flash file and update FAID!

[ozpacific]

I have fixed the problem !!
As on NewWinDCT3 s/w, when choose the mcu & ppm
then save to fls. Then flashed in, cause Contact Service message.
So had to use wintesla to dejan converter s/w, then use rolis..
No more contact service. What cause the probelm, was the fls from 2 different s/w had different file size...