8250 in portuguese what i made wrong?

[locom]

i have translate the language of a 8250 to portuguese with t9 as said in a thread here on the forum, and then i flash it to the phone. it will be ok if he doesn't shut down constantly and no network .i tried all but still nothing.
any sugestion?
is it needed to update the mcu checksum? if yes how can i do this and with which prog?
if anyone wants to see if the ppm is ok tell me.
thanks

[Finn]

U need to calculate faid via log files using tek log calculator..
or open your flash with PPM manager 0.91 and correct all PPM CRCs.THen flash it and calc FAID using KNok 22 or EEprom tools3

[locom]

I already tried to calculate faid by log but this message appears:

FLS MCU doesn't match with flashed MCU.

Do i need to calculate the mcu checksum if yes how can i make it.

[NokDoc]

Solution for 15 seconds rebooting error:

Read carefully Mr. Finn's reply:

1. Open your flash with PPM manager 0.91 and correct all PPM CRCs, save it again.

2. Then flash it.

3. Quick Set FAID using KNok 22 or EEprom tools3.

Step 1 & 3 fully replace the log file method!

NokDoc

[locom]

problem solved.
i use nkcalc press F1 and thats all, now i have a 8250-502 pack P and with T9.

thanks