Before using this guide you must obtain a new battery from nokia center or any other source.
Things you need:
1. T6 Screw Driver.
2. New Internal battery.
3. Steady Hands, shaking not exceptable
Ok, Here goes:
OPENING THE BOTTOM COVER:
1. Turn your commy off & Remove the Battery.
2. Remove the four rubbers.
3. Remove the four screws under the rubber (1,2,3 & 4).
4. Open the lid and remove both cards (Sim & MMC)
5. remove the two remaining screws under the Lid (5 & 6).
6. Open the commy carefully.
Things to take care when you remove the bottom:
1. The black IR part.
2. Speaker & it's white rubber(No.2 shown in the picture "Diagram 2".
3. Sim & MMC connectors (don't touch them).
4. Don't touch unnecessary to any internal parts.
5. And don't try to open the PDA side when you remove the bottom part.
In some cases the battery (1) and the speaker white rubber (2) are sticked to the bottom part. So don't be shocked if you don't find them in the proper place.
Now you can easily replace the battery(1), it's attached with a strip with black rubber on top.
After replacing the battery, you can reverse the process to assemble your commy(OPENING THE BOTTOM COVER).
I tried my best to guide on how to replace the internal battery, sorry for the low quality pictures, it was from my nokia commy camera.
Enjoy!
Credits are Dr JPB
Reply With Quote
Bookmarks