FINALLY FREE NOKIA FAID UPDATE FOR EVERBODY!!!!

**||Joe** · 19-02-2002, 12:09 AM

hi!

here is my little prog:

use it with logs created by b-phreaks logger v1.2!
you also need the file you flashed into the phone for checksum-calc.

enjoy,
greets -tek-

**ByteMe** · 19-02-2002, 12:17 AM

Hi!

Does it Work? Or r u just looking for some fun?

BR.
ByteMe

**NokDoc** · 19-02-2002, 12:53 AM

Tried it with original version and V1.5 bPhreaks, 1.2 doesn't work.
Program got stuck on incorrect checksum.

Maybe want to share what's the calc of PPM checkSum based upon?

NokDoc

**||Joe** · 19-02-2002, 01:06 AM

**NokDoc** · 19-02-2002, 01:28 AM

Oops, It works, only MCU/PPM, sorry.

1 question before I'll try this tomorrow, Is it revertable, can I put my old version back in afterwards?

NokDoc

**NokDoc** · 19-02-2002, 01:33 AM

This belongs to the earlier message, Ur Version, still sorry.

NokDoc

**Iccang** · 19-02-2002, 01:34 AM

**Iccang** · 19-02-2002, 01:37 AM

hi Nocdoc..

Try at Com 1. I always get message like that if I use the com 2. Hope can help..

BR,
Iccang
=====

**NokDoc** · 19-02-2002, 01:40 AM

Com1 att internally to infrared port, maybe switchable, will try tomorrow.

The program seems to be interesting at other forum.

http://uk.briefcase.yahoo.com/davie_barl/

Good Luck any many thanX in advance; NokDoc

**||Joe** · 19-02-2002, 01:41 AM

**DavieB** · 19-02-2002, 01:46 AM

**DavieB** · 19-02-2002, 01:49 AM

@NokDoc:
Are you trying to read a partially unlocked phone? B-phreaks hates them and sorta dies when you try! Try flashing full mcu/ppm back to the phone..

**NokDoc** · 19-02-2002, 01:50 AM

No it does work now, check this, this is log of the original mcu/ppm that was in it.
3310-406 B

Seems reliable.

[data]
in=4F42
---------------
[edat]
out=645AB3D275D9F4E8920DA793

[data]
out=4D
---------------

Only it's 0:53:00am out here and need to work tomorrow.

NokDoc

**DavieB** · 19-02-2002, 02:27 AM

**Iccang** · 19-02-2002, 03:53 AM

Hi All..

That software is Perfect!!!!!!!!!!!

I was tried to 35 log files and the result of it I was compare with the original log out files from b-phreaks. and it's same 100% !!!!!!!

You're the Greater, tek!!!

BR,
Iccang
======

Al · 19-02-2002, 10:17 AM

yes... thanks tek!!! it works! no more dejan box.... i just tried it on a 6210 up/down sw , change language...

how i wish u can teach me how to convert the faid calc to bphreak log format.. thanks.

**||Joe** · 19-02-2002, 11:05 AM

**||Joe** · 19-02-2002, 01:04 PM

hello.

**||Joe** · 19-02-2002, 01:11 PM

@tek
you are a genius my friend. thank you for this present.
this may sound cheeky but, and I wouldn't usually ask (but because of your kindness I will), would you mind me dissasembling your exe to get FAID algo? I understand if you do not want to give it for free, but I would like to program mcu/ppm flasher with built in FAID algo - possibly using fls2 device or manually switching between m/fbus.
again thx
outerc0re

**||Joe** · 19-02-2002, 01:23 PM

one question
if possible make faid when i make full flash with eeprom ?

**||Joe** · 19-02-2002, 01:31 PM

yep, can calc faid after full flash but phone will not work (i think)

**||Joe** · 19-02-2002, 01:33 PM

hello.

**||Joe** · 19-02-2002, 01:49 PM

so tek, do you mind me diss'ing your exe??? if you do mind then I will not...honestly, but this would be good for all ppl......your call.
br
outerc0re

**||Joe** · 19-02-2002, 01:55 PM

this is a log calculete for me thank

**o_MAST** · 19-02-2002, 02:10 PM

Hi cali,

does your Dejan Box work?

Ciao... ho provato a fare il box 2 volte con 2 pic diversi (sempre 04 pero) na non vuole funzionare. Un'altra cosa: io uso il quarzo da 8 MHz, quello li metallico argentato. E' correto o bisogna usare quell'altro tipo?

Grazie

B.r.
CIao

Bye

**||Joe** · 19-02-2002, 02:55 PM

il quarzo va benissimo anche io uso lo stesso e a me funziona immagino il che nel pic hai settato bene i fuses e che i cavi verso il telefono siano correttamente collegati
Ma che problema ti da'

**Abe** · 19-02-2002, 06:30 PM

PER IL PIC 04 USA QUARZ 4 NHZ.............

**HOUSIN ELASKARY** · 19-02-2002, 06:38 PM

thank u tex .....verey thanks....
housin.egypt

**NokDoc** · 19-02-2002, 06:53 PM

Mr Tek "*****"

Herewith my well meant compliments for Ur job.

It grows to be a hype I think, you earned it, after all it was "Your Wisdom".

Because of my com/ lpt problems I can't use the Dejan right now but I assume it's perfectly working for many others at the moment.

This now opened the gate for MCU/ PPM editing etc.

For this Forum I want to Rate you for 5 Stars.

Greetz and Many Many TanX;

NokDoc

**||Joe** · 19-02-2002, 07:38 PM

yes, you are correct NokDoc - worthy of ***** rating

**o_MAST** · 19-02-2002, 09:39 PM

**Ivo** · 19-02-2002, 10:18 PM

Hi, -tek-
take look at this.......

What's new in ver 1.6:
- SimLock data, IMEI Programing data and AuthorityID can be uploaded separately,
so the Logger can be used for repair bad data in the eeprom. The out file will contain
all or any combination of these values and only these available in the Log file will
be uploaded to the phone.
- DSP Test function - this is a still in test so we can't promise you 100% corect result.
The meaning of the test is to check validity of the IMEI and the IMEI_Programming_Data.
If any of them is not valid DSP won't be operational when SimCard is in the phone.
Put a good simcard and switch the phone on, after that tick the DSP Test check box.
In a few seconds you'll get the result of the test. To switch to normal operation, un-
check the box.

What's new in ver 1.5:
-added support for virtually all Nokia phones - 5510, 8250, 8890 .... ( exept DCT4 )
-some improvements in the MBus protocol - If you have problems reading 6210 , please use
v1.2 for that
-update SpData and Imei programming data implemented - but at the moment we can supply
out files only for 51/61 series after change of Cobba. This is usefull for 4 Locks closed
and destroyed IMEI. For this you need Cobba chip from us ( old type 64 TQFP ), after change
you can put any eeprom, any MCU ,any PPM - just make a log and send it to us.
It is not a big deal anyway - only one advantage - don't need to change Flash + Eeprom + Cobba
and destroy whole phone ( only Cobba ). At the moment we can;t supply files for BGA Cobba
chips used in phones after 3210 sorry , there is a problem with update Sp Data, so please
don't mail about it ! Also before do anything send a mail to consult with us, please.
-Delay value is no longer accesible by the user.

What's new in ver 1.2:

-fixed bug with altering the MSID signature in some phones
-fixed wrong reset on 6150 model causing unable to read the phone info
-added MCU ROM Version detection (invisible for the user), this will help us
to make the files faster
......... the Logger V1.5 ahd HI -> DCT3

), but Logger 1.2 have not this.

**ByteMe** · 20-02-2002, 06:56 PM

Damn!

I didn't want to believe when i saw it, but you did it!

Congratulations and my sincere apologies for doubting on you.

ByteMe.

**||Joe** · 20-02-2002, 07:46 PM

hehe...easy...man...

greets,
-tek-

**||Joe** · 02-03-2002, 11:22 PM

I want ask about Nokia 5510 ..what the program can work with it and how and i can send virus to mobile or Blink Message this ....

**meff** · 23-04-2002, 06:29 PM

I cant downlaod this proggie... where can i get it?

**ByteMe** · 24-04-2002, 09:26 AM

Hi!

This proggie was the first one able to calculate FAID! (available to us, of course!)

Now, some more easy to use proggies r available like Eeprom Tools 3.1 or noktool by rolis v1.7b (very recommendend!)

BR.
ByteMe.

Thread: FINALLY FREE NOKIA FAID UPDATE FOR EVERBODY!!!!

Thread Tools

Display

Thread Information

Users Browsing this Thread

Bookmarks

Bookmarks

Posting Permissions