Help Flashing 6600 with UFS

[khalid1210]

1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,002088C0,St M28W640
Fl1: 0x02000000-0x027FFFFF,002088C0,St M28W640
Algorithm: w3_st_i.fia, w3_cbusb.fia
Alg Boot Error: 2
Error Data1:
00000000: 9B 00 04 00 20 00 C0 88 00 00 00 00 02 20 00 C0 .... ........ ..
00000010: 88 00 00 00 00 04 20 00 C0 88 00 00 00 00 06 20 ...... ........
00000020: 00 C0 88 00 00 00 00 FF FF FF FF FF FF FF FF FF ................
00000030: FF FF FF FF FF FF FF 5F 00 00 00 00 00 00 00 00 ......._........
Error Data2:
00000000: E3 72 00 C0 88 00 00 00 00 02 20 00 C0 88 00 00 .r........ .....
00000010: 00 00 04 20 00 C0 88 00 00 00 00 06 20 00 C0 88 ... ........ ...
00000020: 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF ................
00000030: FF FF FF FF 5F C3 72 00 00 00 00 00 00 00 00 00 ...._.r.........
Before taking screenshot, expand this window !
Process Failed, Repowering Mobile

[gokhanalpaslan]

i have same problem pls help me urgent!!!

1st Boot Ok, WD2, UPP: 1081
Fl0: 0x00000000-0x007FFFFF,002088C0,St M28W640
Fl1: 0x02000000-0x027FFFFF,002088C0,St M28W640
Fl2: 0x04000000-0x047FFFFF,002088C0,St M28W640
Fl3: 0x06000000-0x067FFFFF,002088C0,St M28W640
Algorithm: w3_st_i.fia, w3_cbusb.fia
Algorithm Ok, MSID: 84A61E3A9186577CB76E96F250
Decoded MSID: 3E4EBAF7-001EAD49-A8000000
Encoded FAID: 7B48AADE-FFE72674-286CF173
Cbus Boot Error: 9
Error Data1:
00000000: 00 96 84 A6 1E 3A 91 86 57 7C B7 6E 96 F2 50 96 .....:..W|.n..P.
00000010: 00 C0 88 00 00 21 01 10 00 04 20 00 C0 88 00 00 .....!.... .....
00000020: 21 01 10 00 06 20 00 C0 88 00 00 21 01 10 00 C6 !.... .....!....
00000030: 00 00 EA 75 01 00 EA 78 01 00 EA 7B 01 00 EA AA ...u...x...{....
Error Data2:
00000000: A3 72 72 C0 88 00 00 21 01 10 00 02 20 00 C0 88 .rr....!.... ...
00000010: 00 00 21 01 10 00 04 20 00 C0 88 00 00 21 01 10 ..!.... .....!..
00000020: 00 06 20 00 C0 88 00 00 21 01 10 00 C6 00 00 EA .. .....!.......
00000030: 75 01 00 EA 78 01 00 EA 7B 01 00 EA AA C3 72 00 u...x...{.....r.
Before taking screenshot, expand this window !
Process Failed, Repowering Mobile

[technodaw]

Hi khalid1210.Be sure that u select the mcu and the ppm correctly .If they were corrected ,try to flash the ppm only .

[THE FOX]

try and format the user area, before you reflash..
and after flashing format again. power the fone on and reset all the user settings.
fone must be on to do these!!!!
do not do it with the fone off....

[gokhanalpaslan]

i solved the problem
i tiried everything but nothing happen until i try bluetooth hardware check
i just used hot air on bluetooth area and flashed again and phone is working now