Results 1 to 10 of 10

Thread: 3310 no network after unlocking

  1. #1

    Question 3310 no network after unlocking

    i got a 3310 (ver 4.24) that i've unlocked with rolis 1.8 , but after introducing simcard and chossing network coresponding to the simcard manualy , i got message (access denied), and trying the same simcard into another phone it works correctly .

    whats going on ????

  2. #2

    Cool Use Eeprom Tools v3.0.

    Use eeprom tools to reset lock and recalculate phone id.

  3. #3
    yea i've got the same problem with a phone i bought off of a mate

    Basicly, when i shove ANY simcard into it, it gets a signal for 5 seconds, then dies

    I have a flasher cable and an mbus/fbus cable, but both for different phones

    I'm going to buy a flasher cable for all phones one day lol

  4. #4
    Join Date
    Apr 2003
    Location
    cavite, pilipinas
    Posts
    16
    from what i've encoutner the 5 second signal disapears, coz your phone might be blocked

  5. #5
    Indeed..

    But if i change the imei, i get the same problem

  6. #6
    Could be that the FAID needs to be updated!!

    Use eeprom tools and click on the magnifying glass - this will update FAID.

    Otherwise you can use eeprom tools to run a test by ticking TEST box on right of screen!!

    Good luck

  7. #7
    Join Date
    Feb 2003
    Location
    Delhi,India
    Posts
    3
    no friends signal loosing is becoz of hardware problem and not software and if u r not getting network after unlocking u need to update FAID to get network ......

  8. #8
    Join Date
    Apr 2003
    Location
    Malaysia
    Posts
    15
    i'm also facing the same problem....
    i'm using rolis 4.78 build 6 and rolis tool 1.8
    After i upgrade my NK 3310 V4.35 to any version
    I updated the FAID and do unlock the Sim lock using rolis tool 1.8
    but still facing the same problem....

    i can confirm not hardware problem because when i flash to the original software i get back 100% signal...

    Is there any solution for this problem???

    thank

  9. #9
    software has bad signature or wrong product code,
    use another flsh file

  10. #10
    Join Date
    Apr 2003
    Location
    Malaysia
    Posts
    15
    ==<software has bad signature or wrong product code==>

    i don't get the point...
    i try many differrent flash but still cannot...except the original flash file only...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •