Results 1 to 2 of 2

Thread: 8210 Signal Prob

  1. #1
    Join Date
    May 2002
    Location
    Manchester England
    Posts
    3

    Angry 8210 Signal Prob

    I had 2 dead 8210 ver 5.28 i then did the following

    1. flashed phone with full flash for nokia 8210 v5.31

    2.then flashed virgin eeprom for 8210 to address 3D0000

    CONTACT SERVICE now displayed

    3.Then connected M-bus and changed imei using Knock 22

    Phone now boots but no signal

    4.removed SP locks

    5.then selected QUICK SET FAID in the Knock 22 Menu

    One Phone know works Fine but the other

    TURNS ON

    GETS FULL SIGNAL BT CELLNET

    LASTS 10 SEC's THEN FREEZES

    RESTS WITH NO SIGNAL

    Can anybody help either software downgrade or 8850 software or any other ideas

    please help

  2. #2
    i would try to get a full flash and upload it again. if you get contact service after uploading i think that something has gone wrong ( maybe a bad flash file? )
    here is what i would do

    connect to flasher
    open rolis 4.78
    flash software MCU PPM to phone

    now check if it says contact service or not
    if it does then upload a veeprom
    now if you do upload a veeprom flash the software again
    (not nessesary but it sometimes helps)

    now you should be at a stage where you have a phone which does not get contact service and has no signal

    now connect it to mbus and turn phone on
    open knok V22
    set new imei
    quick set faid
    reset sp locks

    if you have any more trouble you should try some different flash and veeprom files

    post back if i can help or if you need further clarification

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •