Results 1 to 10 of 10

Thread: 6310i Security Code - it isn't default

  1. #1

    6310i Security Code - it isn't default

    When I put a PAYG sim into the 6310i I used to have on contract with T-Mob is says 'Security Code'. I have tried the usual 12345 but is doesn't like it. I have run the code unlocker and it says that the phone is not restricted.

    How can I default the Security code?

    Hope someone can help.

    Cheers, JohnO.

  2. #2
    Join Date
    Apr 2002
    Location
    Basingstoke UK
    Posts
    989
    This software will allow you to reset the code to 12345 with a datacable.
    Attached Files Attached Files

  3. #3
    HI, thanks for the response - the software seems to want MSCOMM.

    I have tried this on XP Pro and and old Win98 machine and no joy - do I need more modules? I have just seen another of your post referring to Visual Basic 6 - I'll hunt for the runtimes.

    I only have a data cable for the 6310 - do I need a 'special' cable?

    I have load VB6SP5 runtime and still no job withe the FBUS.EXE program you posted. I'm looking for even more help.

    Cheers.
    Last edited by Rascalator; 22-02-2004 at 09:59 PM. Reason: More detail

  4. #4
    Join Date
    Apr 2002
    Location
    Basingstoke UK
    Posts
    989
    Try this one.
    Attached Files Attached Files

  5. #5
    Thanks...The software runs apparently fine. When I connect DLR-3P cable and mains adapter I get 'ERROR: Phone does not answer!' when I click reset security code.
    ------------- From Help ---------------
    Solution 1:
    1.Connect charger to phone, with battery & MBus cable
    2.Contact Service is show, power off phone!
    3.Phone gets in changing mode (retry if not)
    Press Unlock!
    >>>> I don't understand Contact Service is show <<<<
    Solution 2:
    Connect Btemp (pin next to GND pin on battery) to
    GND, turn ON phone and phone will be in Test mode.
    Or connect BSI (pin next to "+" pin on battery) to
    GND, turn ON phone and phone will be in Local mode.
    >>>> I don't know which is the ground pin, is it -ve on the actual battery or two of the seven gold connectors where the data cable connects.

    Signed: An absolute novice.

  6. #6
    Join Date
    Mar 2002
    Location
    Croatia
    Posts
    402
    Dlr3 is a MODEM cable,so u will need a DATA cable for playing with MBUS and FBUS commands.Usually data cables come with AUTO FBUS/MBUS switcher,but u can find also with MANULA FBUS/MBUS switcher.Both are same.

  7. #7
    Thanks Abe.

  8. #8
    My firmware is:
    V 5.22
    15-11-02
    NPL-1
    (c) NMP

    Will a cable clear the above security code? Suggestions for a cost effective supplier - I'll only need it once.

    Cheer John

  9. #9
    My firmware is:
    V5.22
    15-11-02
    NPL-1
    (c) NMP.

    If I get a proper cable will it work with my firmware level?
    Where would you recommend a cable for just the one use? I don't want to spend a fortune for a single use.

    Cheers.

  10. #10
    [My firmware is:
    V5.22
    15-11-02
    NPL-1
    (c) NMP.

    If I get a proper cable will it work with my firmware level?
    Where would you recommend a cable for just the one use? I don't want to spend a fortune for a single use.

    Cheers.
    ----
    QUOTE=Rascalator]Thanks...The software runs apparently fine. When I connect DLR-3P cable and mains adapter I get 'ERROR: Phone does not answer!' when I click reset security code.
    ------------- From Help ---------------
    Solution 1:
    1.Connect charger to phone, with battery & MBus cable
    2.Contact Service is show, power off phone!
    3.Phone gets in changing mode (retry if not)
    Press Unlock!
    >>>> I don't understand Contact Service is show <<<<
    Solution 2:
    Connect Btemp (pin next to GND pin on battery) to
    GND, turn ON phone and phone will be in Test mode.
    Or connect BSI (pin next to "+" pin on battery) to
    GND, turn ON phone and phone will be in Local mode.
    >>>> I don't know which is the ground pin, is it -ve on the actual battery or two of the seven gold connectors where the data cable connects.

    Signed: An absolute novice.[/QUOTE]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 6310i security code help !
    By pete_polecat in forum Nokia DCT4 General
    Replies: 2
    Last Post: 10-02-2004, 09:54 PM
  2. Nokia 6510 security code
    By elimosaria in forum Nokia DCT4 General
    Replies: 0
    Last Post: 27-10-2003, 01:03 PM
  3. 6210 security code
    By duplos in forum 55XX / 52XX / 62xx / 63 xx / 71xx / 72xx [Closed]
    Replies: 4
    Last Post: 24-05-2003, 01:29 PM
  4. 6310i security code
    By besobeso in forum Software [Closed]
    Replies: 2
    Last Post: 18-04-2003, 01:08 PM
  5. Nokia 6310 and 6310i Security code reset
    By MSport in forum 55XX / 52XX / 62xx / 63 xx / 71xx / 72xx [Closed]
    Replies: 1
    Last Post: 10-03-2003, 07:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •