Results 1 to 7 of 7

Thread: ufstools

  1. #1

    Lightbulb ufstools

    ufs tools...softwares,,who wants ufs box to run in hkw...
    Attached Files Attached Files
    Last edited by SOMONTAN; 24-09-2005 at 02:52 PM. Reason: wrong message

  2. #2
    Join Date
    Jun 2003
    Location
    india
    Posts
    69
    do u have any idea on
    repairing the dead ufs3 tornado box
    its prosessor is ok (tested)
    what r the hardware faults found on the main pcb

  3. #3
    Join Date
    Aug 2002
    Location
    HANOVER, USA
    Posts
    265
    Check to see if the board has dry joints in the solder?

    Just use a soldering iron and reflow all the points...

    GOOD LUCK...

  4. #4
    Join Date
    Jun 2003
    Location
    india
    Posts
    69
    Quote Originally Posted by THE FOX
    Check to see if the board has dry joints in the solder?

    Just use a soldering iron and reflow all the points...

    GOOD LUCK...
    resoldered each and every part,
    replaced crystal
    tried evry thing 4 dry solder
    may be some thing else
    any idea?

  5. #5

    nokia 1100 buzer is not working,

    nokia 1100 buzer in not working, i have checked the sorrounding ckt. evry thing ok please any body help me i have started repairing newly.

  6. #6
    first of all it would be cool if you could post in the right section "Nokia Hardware Repair" for this question!

    So your ringer lines come out of the UEM and through two Inductors "L182 & L183" and straight to the Buzzer Pads on the PCB, there are our Decoupling Capacitors, "C191, C192, C187 & C188", if any of these are shorted then it will stop your buzzer from working.

    http://putfile.com/pic.php?pic=11/31604190031.jpg&s=x11

    Component Layouts for you son!

    Oh and make sure the ringer is actually ok and doesnt need replaced and make sure the contacts are clean!!

    G
    Searching is the act of trying to find something or someone...

    One may search for something that is known to exist, with the intent to locate it...

    If You Post IMEI's or Code Request then READ THIS!!

  7. #7

    nokia hardware

    try to trace in your nokia schematic diagram u can get it gudlack..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •