pls help, cannot flash 1110

[elgar]

I used ufs3 to flash nokia 1110 with DCTxbb5 tools, but result in
"Detected: V 3.42 22-09-05 RH-70 (c) NMP N1110
1st Boot Err: Bad Resp UPP, 02 FF FF 72
Process Failed, Repowering Mobile"

can anyone help me? great thanks.

[adampeake]

Two reasons for this error using UFS.

1. Hardware problem with the phone

2. A bad connection from the box to the handset itself.

Personally I usually find the connection isn't correct or the cable is damaged. Check inside the flash adaptor to see that none of the pins are touching. This is a common fault.

Was the phone working ok before you attempted the flash?


A

[elgar]

thx adampeake, i can use the cable to unlock and read content from the phone, and swtich between test mode, local mode and noral mode. but cannot flash the phone. any idea? thx

[adampeake]

I am not a hardware expert but I would guess that your Flash IC requires reflowing or replacing.

Adam

[sergo_zmeia]

Why are |U using |BB5 option...1110 is a dct4 phone....update |Ur service software first...
WBR!
sergo_zmeia