PDA

View Full Version : Flashing 3410 problem


martinzaloudek
15-01-2003, 07:47 PM
Which program can I use to flash nokia 3410. Rolis and Knok don't work.

I thing, that original dejan flasher would work. Bud I don't know, how I must set up (which bootloader,...).

Please help me. Thanks
gkagg
15-01-2003, 07:59 PM
Try this one ...
martinzaloudek
15-01-2003, 08:09 PM
Id doesn't work :(
Vinny
15-01-2003, 08:40 PM
Try this ...
aZyWeRks
15-01-2003, 08:44 PM
use rolis, again. set it to 3330.

its basically the same flash ic.
Yummieee
15-01-2003, 08:44 PM
˛martinzaloudek
Rolis works with 3410!
Just choose 3330 as your model.

EDIT: Hmmm. Somebody was faster than me ;)
martinzaloudek
15-01-2003, 08:48 PM
Are you realy try flash 3410 with rolis??? Or it is only theory that it should work?
Yummieee
15-01-2003, 08:49 PM
I have a 3410 too. THAT WORKS FINE WITH 3330
martinzaloudek
16-01-2003, 03:59 PM
After reading fullflash by Rolis has written error: "mobile choose is wrong" and
"Tune CHK test.....Failed.(readed 0x027A,calculated 0x82DC)"

I didn't risk writing flash into phone. :(
Is it normal??
gatsby76
16-01-2003, 04:41 PM
dude use KNOK i have attached it here

this has option for 3410 -- it works a little slower than rolis but is well reliable !!
martinzaloudek
16-01-2003, 05:18 PM
There is not 3410. Only 3330 and next is 5110 (look to config/models.cfg). I try to add 3410 to this file, but it isn't work)
Yummieee
16-01-2003, 05:58 PM
˛martinzaloudek
It's normal. Only the Flash-size does matter.
3330 and 3410 have the same size, so you can flash/read the 3410 with the option 3330.
Hey! You can ask everyone who has the 3410. THAT WORKS.

But you mustn't correct the checksums using rolis (3330)
martinzaloudek
16-01-2003, 06:39 PM
Very thanks all. Rolis really work. Bud I have second problem.
Phone doesn't register to network.
I use PPM Manager 0.91 to update CRC. I think, that this program can't update CRC correctly on 3410. Can you advise any other program for update CRC (I don't think FADI, bud MCU and PPM checksum).
Yummieee
16-01-2003, 06:44 PM
You have to kill Flashcheck/Faid!

Open g3n0lite 1.7
Load your Backup (without eeprom)
klick "kill mcu chk" then kill "flashcheck/faid" then "fix all checks"
save your file
flash into phone
set faid

then you'll never have to set faid anymore